Bedienungsanleitung Graupner MX12 (Seite 30 von 48) (Englisch)

30127

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Function mode HELICOPTER

Throttle Curves

30 Function mode HELICOPTER

7. Access the THROTTLE CUT function by pressing

the Down key.

8. To exit the THROTTLE HOLD function, press the

Down and Select keys simultaneously.

Throttle Curves

The mx-12 offers two (2) separate throttle curves with

five adjustable points per curve. This function allows you

to customize the throttle curve and pitch curve together

to maximize engine performance at a particular pitch

setting. Once the throttle curves are established, each

can be activated in flight using the two (2) position flight

mode switch.

The flight mode switch offers two selectable ranges:

Normal and Stunt. The Normal position should be used

as the hover throttle curve. The Stunt position should be

used for aerobatic maneuvers and forward flight.

Note: The throttle trim and hovering throttle levers are

only operable when the flight mode switch is in

the normal position. Thus, in normal function it

will have no effect. Also, adjusting the hovering

throttle lever and throttle trim has no effect on

the input values of the throttle curve.

Each of the five points of the throttle curve are indepen-

dently adjustable from 0-100%. These five points corres-

pond to the position of the throttle stick. The illustration

below shows the normal throttle curve setting for the

dead slow position with throttle trim at default.

Output value

Stick position

Throttle curve graph

Flight mode SW position

Go to Pitch Curve

Go to Throttle Hold

Press to access the

P-LOW, P-1, P-MID,

P-3 and P-HIGH

curve points

Change value/Switch

selection

Rest value to 0 or

Set function to inhibit

The transmitter is factory preset to the throttle curve as

indicated by the solid line in the figure at right. Individual

middle points can be increased or decreased to suit

your specific needs.

The throttle trim lever position will affect the low-point

position as shown when in the Normal mode Throttle

Curve.

Throttle Stick

P-HIGHP-MIDP-LOW

Throttle Trim

Operating Range

Hovering Throttle

Operating Range

Output Value

Accessing the Throttle Curve Function

1. Place the transmitter power switch in the ON positi-

on.

2. Press the Down and Select keys simultaneously

to enter the Function mode.

3. Press either the Up or Down key until THRO ap-

pears in the upper portion of LCD.

Note: Use NORM for hover curves and STUNT for

aerobatics. We will concentrate on the hovering

curve during this example.

4. Press the Select key to select the point of the curve

you want to change.

5. Press either the (+) or (-) key to change the value of

the current curve point. The range of each point is

0-100% in 0,5% intervals.

Note: In each curve, the factory setting indicates INH

for points 1 and 3. These values are 25% and

75% respectively if no value changes are made

to any other points. If any of the other points

have been changed while these points were

inhibited, the inhibited points will also change

to plot a smooth curve. If you want to keep this

from happening, press the Select key until the

display indicates P-1 or P-3 at the upper right

portion of the LCD. Press either the (+) or (-)

key to activate the points 1 (25%) or 3 (75%).

The values for each of these curves can then

be fully adjusted by pressing either the (+) or (-)

key.

6. To set curves for STUNT mode, press the Select to

highlight the NORM function, then press the (+) or (-)

key to select the STUNT function. Repeat Steps 4

and 5 to complete the procedure.

7. Access the PITCH CURVE function by pressing the

Up key.

8. Access the THROTTLE HOLD function by pressing

the Down key.

9. Exit the THROTTLE CURVE function by pressing

the Down and Select keys simultaneously.

Throttle Time Settings

The throttle trim lever is only active when the flight mode

switch is in the normal position. The throttle trim is used

to increase or decrease the engine power when the

flight mode switch is in the Normal mode. The throttle

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX12 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info