Bedienungsanleitung Graupner MX12 (Seite 36 von 48) (Englisch)

30127

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

System Mode

Model Selection; Model Name Entry

36 System Mode

Model Selection

The mx-12 system offers memory for ten completely

separate models. Therefore, it is possible to have a

mixture of helicopter and airplane setups retained in

memory. It is also recommended that the Model Name

Entry function be used in conjunction with each model

setup. Another very useful function of the Model Selec-

tion function is the ability to set one aircraft up several

different ways. This is helpful when multi-task perfor-

mance is desired.

Model Number (1~20)

Type

Modulation

Model Name (If programmed)

Go to model name

Go to Wing Type or

Swash Plate menu

Toggle between

Model and Timer

Change selected

character

Clear Timer

(when selected)

Accessing the Model Select Function

1. While pressing the Down and Select keys, switch the

transmitter to the ON position to enter the Model

select mode.

2. Model Select will be displayed on the upper left

portion of the LCD. If not, press the Up or Down

key until MODEL SEL is displayed.

3. Pressing the (+) or (-) key will select among each of

the ten models available. Notice that as each model

is selected, its name appears in the LCD.

4. Once the desired model is displayed on the left,

pressing the Down and Channel keys simultane-

ously will exit the Model Selection function and

establish the model displayed as the new current

model.

5. Press the Select key to select the timer function to

clear the Total Timer. Press the Clear key to clear

the Total timer.

6. Press the Down key to access the WING TYPE

function.

7. Press the Up key to access the MODEL NAME

function.

8. Press the Down and Select keys simultaneously

to exit the MODEL SEL function.

Model Name Entry

The mx-12 allows on 8-digit name to be input for each

of the ten models available. The current model will be

displayed in the Normal display.

Model number Type

Modulation

Model name beeing programmed

Go to Model

Type menu

Go to Model

Select menu

Select

character

Change selected

character

Reset selected

character to blank

space

Accessing the Model Select Function

1. While pressing the Down and Select keys, switch the

transmitter to the ON position to enter the Model

select mode.

2. Press the Up or Down key until MODEL NAME is

displayed.

3. Press either the Up or Down key to select the first

character for the model name.

4. Press the Select key to advance the character

selection to the next character.

5. Repeat this procedure until all eight characters have

been selected.

6. Press the Down key to access the MODEL SEL

function.

7. Press the Up key to access the MODEL TYPE

Selection function.

8. Press the Down and Select keys simultaneously to

exit the MODEL NAME function.

Selectable character:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Graupner MX12 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Graupner MX12

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info