542407
92
Zoom out
Zoom in
Vorherige Seite
1/96
Nächste Seite
44 / 48
S1042_sh_V1
Firmware update
Firmware updates of the transmier are carried out via the back
DATA port using a laptop or PC with Windows 7 ... 10. You will also
need a USB interface, order no. 7168.6, and adapter lead, order no.
7168.6A or 7168.S, which are available separately.
The programs and files required can be found in the Download area
for the corresponding products at www.graupner.com
Download this soware package from the Internet, and unpack it on
your computer. All other informaon can be found in Internet in the
same page where the soware package is available.
Connect the adapter lead to the USB interface. The polarity of the
plug-in system cannot be reversed. Note the small chamfers on the
sides. Do not use force, the plug should click into place easily.
The update is carried out via the "HoTT device" program secon of
the program "Firmware_Upgr
ade_gr_Studio". Please follow the
notes of the soware. The further procedure is also described in
detail in the manual contained in the data package. You can also
download these from the download page of the product at
www.graupner.com
Transmier soware update
Perform update step by step
Before each update check the transmier baery charge status.
Connect the interface through the included USB cable to a PC.
Do not disconnect the link to the computer during an update!
Make sure that the link between the transmier and computer
is operaonal.
Plug the other end of the adapter cable into the jack marked
"DATA" on the back of the transmier. Make sure that the orange
cable is plugged into the le, marked as "S", and the brown or
black cable on the right PIN marked with a "-". Do not apply
force.
The plug should be fully inserted.
Select "Auto download" or "Open file" to select between the cur-
rent firmware versions.
Select the file "mz-10_ ... bin" if you want to keep the default
firmware or to return to it or the file "MZ-10C_ ... bin" for the
copter version.
92

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Graupner mz-10 HOTT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Graupner mz-10 HOTT

Graupner mz-10 HOTT Bedienungsanleitung - Deutsch - 72 seiten

Graupner mz-10 HOTT Bedienungsanleitung - Englisch - 48 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info