Bedienungsanleitung Grizzly EKS 1835 QT (Seite 149 von 200) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Polnisch)

505393

149

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

149

into the diameter of the trunk to

prevent splitting. Then saw from

the top downwards with the lower

edge of the bar towards the rst

cut to prevent the bar from be-

coming jammed in the wood..

3. Log is supported at both ends:

Start from the top and work down

(with the lower edge of the bar)

to a third of the diameter of the

trunk. Then saw from underneath

with the upper edge of the bar

until the two cuts meet.

4. 

Hold the electric chainsaw steady

with both hands, keeping the saw

in front of you while sawing. Once

the saw is through the wood,

guide the machine passed you

on the right (1). Hold your left arm

as straight as you can (2). Watch

out for the falling trunk. Position

yourself to prevent any danger

from the separated trunk. Watch

your feet. The trunk may cause

injuries when falling. Keep your

balance (3).

Limbing

Limbing is the designation for the sawing off

of branches and boughs from a felled tree.

Many accidents occur during the

removal of branches. Never cut tree

limbs when you are standing on the

log. Keep the spring-back area in

mind if branches are under tension.

• Do not remove support branches until

after the sawing off.

• Branches under tension must be

sawed from below to above, in order to

prevent jamming of the chainsaw.

When working on thicker branches,

use the same technique as when you

are sawing up a felled trunk.

• Work to the left of the log and as near

as possible to the electric chainsaw.

As far as possible, the weight of the

saw should rest on the log.

• Change position to saw off branches

on the other side of the trunk.

• Branches sticking out are cut off sepa-

rately.

Felling trees

A lot of experience is necessary



-



case should you use the electric



anything.

• Ensure that no people or animals

are in the eld of action. The safety

distance between the tree to be felled

and the nearest-located workplace

must be 2 ½ tree lengths.

• Note the felling direction:

The user must be able to move safely

near the felled tree, to saw off the tree

easily and remove branches.It is to

be avoided that the felled tree snags

itself on another tree. Note the natural

felling direction, which is dependent

on the slope and curvature character-

istic of the tree, wind direction and the

number of branches.

• In the case of sloping ground, stand

above the tree to be felled.

• Small trees, with a diameter of 15-

18 cm, can usually be sawn off with

one cut.

• In case of trees with a larger diameter,

a notched cut and a back cut must be

implemented (see below).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grizzly EKS 1835 QT Seite 149

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info