Bedienungsanleitung Grohe 39141 (Seite 6 von 14) (Deutsch, Englisch, Holländisch, Polnisch)

759360

Zoom out

Zoom in

Vorherige Seite

1/14

Nächste Seite

Applications

The radio receiver unit triggers flushing by using a radio

transmitter.

Additionally, flushing can be triggered by manual actuation.

Manual actuation requires a WC cover plate for the pneumatic

outlet valve (not included in the delivery specification).

For actuation via radio control, use radio transmitter order

no. 38 758 or 39 142 + button (see replacement parts fold-out

page I). As an alternative to GROHE radio transmitters, the

product can also be used with radio transmitters made by

Hewi, Keuco, Lehnen, Normbau, Pressalit, AMS, Deubad,

Erlau FRELU and FSB.

Installation is an option with cistern GD2 with pneumatic outlet

valve and filler valve on the left side, see fold-out page I

Fig. [1].

Safety information

• Perform installation in frost-proof rooms only.

• Use only genuine replacement parts and accessories. Using

other parts will void the warranty and CE marking.

Technical Data

• Voltage supply: 4 x 1,5 V battery, type LR-20

• Reception frequency: 868.4 MHz

• Flow volume (3 - 6/9 l adjustable): 6 l

• Small flow volume: 3 l

(radio transmitters with 2 buttons only)

• Blocking time after a flushing: 5 s

• Automatic flushing (72 Hours): Inactive

Approval and conformity

Conformity declarations can be obtained from the following

address:

GROHE Deutschland Vertriebs GmbH

Zur Porta 9

D-32457 Porta Westfalica

Installation

Observe installation dimensions, see Fig. [2].

New installation: Cut off inspection chamber flush with

tiles, see Fig. [3a].

Conversion: Dismantle actuation plate, see Fig. [3b].

Prepare cistern, see fold-out pages I and II, Figs. [4] to [6].

Replace existing hose with included hose with elbow, see

Fig. [7].

Attach lift rod to overflow pipe of outlet valve, see Fig. [8].

Insert batteries (not included in the delivery specification),

see Fig. [9].

Making settings, see chapter Making settings.

Install radio receiver unit, see Fig. [11] and [12].

Open water supply, see Fig. [12].

Install actuation plate, see Fig. [13].

Making settings

Registering a radio transmitter

A maximum of 30 radio transmitters may be registered.

When registering a radio transmitter, make sure that no other

radio transmitters are being operated at the same time.

Deleting a radio transmitter

Set flow volume

This product conforms to the requirements of the

relevant EU directives.

1. Activate registration mode by pressing button (A), see

Fig. [10].

Indicator lamp (B) displays:

██

2. Within 30 seconds, press the transmitter button (C) for

triggering flushing.

Indicator lamp displays:

██ ██ ██

The actuated radio transmitter is registered. Registration

mode is terminated.

Further radio transmitters are registered as described above.

1. Press and hold button (A), see Fig. [10].

Indicator lamp (B) displays:

██ ______________________________██

2. Release button.

All registered radio transmitters have been deleted.

1. Activate registration mode by pressing button (A), see

Fig. [10].

Indicator lamp (B) displays:

██

2. Repeat pressing and holding button (A).

Indicator lamp displays:

▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌▌___

3. When___ appears, release button.

Flow volume setting mode is activated. Flow volume is

selected by pressing the button.

4. Button pressed for the first time (within 2 seconds)

Indicator lamp displays:

██ ██ ██ Flow volume 3 l

Button pressed for the second time (within 2 seconds)

Indicator lamp displays:

██ ██ ██ ██ Flow volume: 4 l

Button pressed for the third time (within 2 seconds)

Indicator lamp displays:

██ ██ ██ ██ ██ Flow volume: 5 l

Button pressed for the fourth time (within 2 seconds)

Indicator lamp displays:

██ ██ ██ ██ ██ ██ Flow volume: 6 l

Button pressed for the fifth time (within 2 seconds)

Indicator lamp displays:

██ ██ ██ ██ ██ ██ ██ Flow volume: 9 l

After the group with 7 flashing signals, the routine starts

from the beginning.

The flow volume is selected by refraining from pressing the

button within 2 seconds after the desired flow volume is

signalled.

One flush is performed at the set volume with the signal

flashing once more.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grohe 39141 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info