Bedienungsanleitung Ground zero GZCR 755MON (Seite 39 von 42) (Deutsch)

505523

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

GROUND ZERO

Exiting the settings

To exit the settings menu again, please navigate to the last item (X) in the bar on top.

The menu item “exit menu” will appear. Press the five-way multifunction button once to exit the menu.

You can also exit the menu at any time by pressing the SETUP button.

BLUETOOTH Operation

The unit is compatible with Bluetooth international standard wireless communication technology

V1.2 & V2.0 EDR and supports HSP, HFP, A2DP, AVRCP. The unit has excellent software controlled

ECHO cancellation with noise elimination you can place a hands-free call using a Bluetooth

compatible mobile phone.

Pairing

Start searching a new Bluetooth device according the manual of your Mobile Phone. As soon as your

phone finds "CAR RADIO", select "CAR RADIO” and key in the code "0000" and confirm ok.

The Phone and the unit will now start pairing and

the device paring is finished. After a Bluetooth

connection is made between the Phone and the unit,

the BT indication will be ON and the icon of

“Bluetooth” in the main menu will light, click

“Bluetooth” to enter Bluetooth mode.

Suggestion:

1. Set "My phone's visibility" as "show to all"

2. Select "Yes" in "Set as authorized."

Auto Connecting

When turning on the unit, the last paired phone will be connected to the device via Bluetooth

automatically, after searching about one minute, if the device cannot find the paired phone, it will stop

searching. When in standby mode (unconnected), short press the Bluetooth button on the Remote

Control to activate the auto-connect function and the device will start searching the last paired phone.

(Example, when you were connected, but you take the mobile phone more than 10 meters away from

the unit, the Bluetooth connection will be disconnected. Press the Bluetooth button on the Remote

Control to activate auto connecting function after you get back.)

BLUETOOTH pairing code: 0000

GROUND ZERO

Key Pad Dial Mode

Make a call

After connecting your mobile phone BT to the device BT, press BLUETOOTH button on remote control or

press BLUETOOTH in SOURCE MENU to enter into key pad dial mode.

To make a call, press digit buttons on remote control or on-screen menu to enter telephone number

(when you enter a wrong number, press “C” button on remote control or on on-screen menu to delete

digit one by one), and then press the green button to dial the number.

Redial

In key pad dial mode press the green button once to redial last number.

Voice Dial Mode

In key pad dial mode, click on the speaker icon on screen or press cursor up/down button on

remote control to enter the voice dial mode. After entering this mode, speak out the recorded voice tag,

after finding out the matching voice tag, the number will be dialed automatically.

(Note: Voice dial need to be supported by your mobile phone).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Ground zero GZCR 755MON Seite 39

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info