Bedienungsanleitung Grundig GT56824C (Seite 24 von 40) (Englisch)

773745

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

24 Dryer / User manual

6.5 Auxiliary functions

Dryness level

Dryness level button is used for adjusting to

desired dryness. Program time may change

depending on the selection.

You can activate this function only

prior to start of program.

Wrinkle prevention

You can turn on and off the wrinkle prevention

function by pressing the wrinkle prevention

selection button. If you will not take the

laundry out immediately after the program has

completed, you may use Wrinkle prevention

function to prevent wrinkling of your laundry.

Audible warning

Drying machine makes an audible warning

when the program is completed. Press the

“Audible Warning” button if you do not want

audible warning. When you press the audible

warning button, the light goes off and it does

not sound when the program is completed.

You can select this function before

the program starts or after the

program starts.

Low temperature

You can activate this function only prior to start

of a program. You can activate this function

if you want to dry your laundry at a lower

temperature. The program duration will be

longer after it becomes activated.

End time

You can delay the end time of the program up

to 24 hours with end time function.

1. Open the loading door and place the

laundry.

2. Select the drying program.

3. Press the End Time selection button and

set the delay time you wish. End time LED

turns on. (When pressed and hold the

button, End Time proceeds non-stop).

4. Press the Start / Stand-by button. End

Time countdown begins. The “:” sign in the

middle of displayed delay time flashes.

You can add or remove laundry

within end time. Displayed time is

the sum of normal drying time and

end time. End Time LED turns off at

the end of countdown, the drying

starts and the drying LED turns on.

Changing the end time

If you want to change the duration during the

countdown:

Pause the program and Turn the On/Off/

Program Selection button and cancel the

program. Select the desired program and

repeat the End Time selection.

Cancelling the end time function

If you want to cancel the end time countdown

and start the program immediately:

Pause the program and Turn the On/Off/

Program Selection button and cancel the

program. Select the desired program and press

the “Start/Pause” button.

Drum Light

You can turn on and off the drum light by

pressing this button. The light turns on when

the button is pressed and turns off after certain

time.

6.6 Warning indicators

Warning indicators may vary

depending on the model of your

drying machine.

Filter cleaning

When the program is completed, the warning

indicator for filter cleaning turns on.

Water tank

If the water tank fills up while the program

continues, the warning indicator starts flashing

and the machine goes into stand-by. In this

case, empty the water tank and start the

program by pressing the Start / Stand-by

button. Warning indicator turns off and program

resumes.

Cleaning of filter drawer/

heat exchanger

Warning symbol flashes periodically to remind

that filter drawer must be cleaned.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GT56824C Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info