Bedienungsanleitung Grundig GT56824C (Seite 26 von 40) (Englisch)

773745

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

26 Dryer / User manual

Adding laundry after the drying

operation starts may cause the

dried laundry inside the drying

machine to mix with wet laundry

and leave the laundry damp at the

end of operation.

Adding or removing laundry

during drying may be repeated as

many times as you wish. But this

operation continuously interrupts

the drying operation, and thus

increases program duration and

energy consumption. So, it is

recommended to add laundry

before the program starts.

If a new program is selected by

turning the program selection

button while the drying machine is

in stand-by, the running program

terminates.

Do not touch the inner surface of

the drum while adding or removing

clothes during a continuing

program. The drum surface is hot.

6.10 Cancelling the program

If you want to cancel the program and

terminate the drying operation for any reason

after the drying machine starts running, Pause

the program and turn the On/Off/Program

Selection button; the program terminates.

The inside of the drying machine

shall be extremely hot when you

cancel the program during machine

operation, so run the refreshing

program to allow it to cool down.

6.11 End of program

When the program ends, the LED’s of End/

Wrinkle Prevention and Fibre Filter Cleaning

Warning on the program follow-up indicator

turn on. Loading door can be opened and

drying machine is ready for another operation.

Turn the On/Off/Program Selection button to

On/Off position in order to turn off the drying

machine.

If the Wrinkle Prevention mode

is active and the laundry is not

removed after the program is

completed, the wrinkle prevention

function activates for 2 hours to

prevent the laundry inside the

machine to get wrinkled. The

program tumbles the laundry with

10-minute intervals to prevent them

from wrinkling.

6.12 Odour feature

If your drying machine has odour feature, read

the ProScent manual to use this feature.

6.13 HomeWhiz Function

Firstly, the homewhiz application should be

installed on your phone.

The detailed information regarding the

homewhiz application is available on https://

www.homewhiz.com/

Turn on the bluetooth on your phone.

Switch the program selection button to Off

mode.

Press the Dryness level and Remote Control

keys together for 3 seconds. 3-2-1 appears

on the screen during this time. Then the image

below appears on the screen.

Select the product model to add from the

application Devices->Add Device->Cleaning

Devices->Dryer

Add the product stock number by selecting Wifi

and Bluetooth.

The surrounding Wifi networks appear on

the screen after selecting start to add, select

the network to add and enter the network

password.

The product screen is closed after the

installation is completed and in the application,

it is asked to select the room where the product

will be added.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GT56824C Seite 26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info