28
C
You may repeat laundry
adding or removing
process as many times
as you desire during
drying. However, this
process will increase
the programme time
and energy consumption
since the drying process
will be interrupted
repeatedly. Therefore, it
is recommended to add
laundry before the drying
programme has started.
C
If you select a new
programme by turning
the Programme Selection
knob while your machine
is in Pause mode, then
the current programme
is aborted and new
programme information is
displayed.
CAUTION: Do not touch
the inner surface of the
drum when adding or
taking out laundry while
a programme is running.
Surfaces of the drum are
hot.
6.13 Cancelling the programme
If you want to stop drying and cancel
the programme for any reason after
the machine has started to run, press
and hold the On/Off/Cancel button
for 3 seconds.
A
CAUTION: As the inside
of the machine will be
excessively hot when you
cancel the programme
while the machine is
running, activate the
ventilation programme to
cool it down.
6.14 End of programme
Lint Filter Cleaning and Water Tank
warning symbols light up in the
programme follow-up indicator when
the programme comes to an end. The
loading door can be opened and the
machine becomes ready for a second
cycle.
Press On/Off/Cancel button to switch
off the machine.
C
2-hour Anti-creasing
programme will be
activated if the laundry
is not taken out after the
programme has come to an
end.
C
Clean the lint filter after
each drying. (See "Lint
Filter and Loading Door
Inner Surface")
C
Drain the water tank after
each drying cycle. (See
"Draining the water tank")
