Bedienungsanleitung Grundig GWNE67E432 (Seite 19 von 68) (Englisch)

769837

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

19 / EN

Washing Machine / User’s Manual

4.3.7 Spin speed selection

Whenever a new programme is selected, the recommended spin speed of the selected programme is

displayed on the Spin Speed indicator.

CIt is possible that the recommended spin speed is not the highest value that can be selected for the relevant programme.

Press the Spin Speed Adjustment key to change the spin speed. Spin speed decreases gradually.

Then, depending on the model of the product, "Rinse Hold " and "No Spin " options appear on the display.

If you are not going to unload your clothes immediately after the programme ends, you can use the Rinse

Hold function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled

when there is no water in the machine.

This function holds the laundry in the final rinsing water.

If you want to spin your laundry after the Rinse Hold function:

- Adjust the Spin Speed.

- Press Start/Pause. Programme will resume. The machine will drain the water and spin the clothes.

If you want to drain the water at the end of the programme without spinning, you can use the No Spin function.

CNo change can be made in programmes where spin speed is not allowed.

If the washing steps permit, you can change the spin speed after the washing cycle has started. If they don’t permit it, you can’t do it.

Rinse hold

If you are not going to unload your clothes immediately after the programme ends, you can use rinse hold

function to keep your laundry in the final rinsing water in order to prevent them from getting wrinkled when there

is no water in the machine. After this procedure, if you want to drain the water without spinning your laundry,

press Start/Pause. Programme will resume where it left off, drain the water and then it will be complete.

If you want to spin the laundry held in water, adjust the Spin Speed and press Start/Pause. Programme will

resume. Water will be drained, laundry will be spun and the programme will end.

4.3.8 Auxiliary function selection

Select the desired auxiliary functions before starting the programme. When a programme is selected, symbols

of the auxiliary functions selected with it will turn on.

CIf you press the key for an auxiliary function that cannot be selected with the current programme, you will hear a warning

from the washing machine.

Furthermore, you may also select or cancel auxiliary functions that are suitable for the running programme

after the washing cycle starts. If the wash cycle has reached a point where no auxiliary function can be

selected, an audible warning will be given.

Some functions cannot be selected together. If a second auxiliary function conflicting with the first one is selected before

starting the machine, the function selected first will be canceled and the second auxiliary function selection will remain active.

An auxiliary function which is not compatible with the programme cannot be selected. (See "Programme and consumption table")

Some programmes have auxiliary functions that must be operated with the selected programme. These functions cannot be cancelled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GWNE67E432 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig GWNE67E432

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info