Bedienungsanleitung Grundig GWNE67E432 (Seite 21 von 68) (Englisch)

769837

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

21 / EN

Washing Machine / User’s Manual

• Child Lock

You can use the Child Lock to prevent children from tampering with the machine. Thus you can avoid any

changes in a running programme.

CWhen the Child Lock is enabled, you can press the On/Off key to switch the machine on or off. When you switch on the

product again, programme will resume where it left off, with the child lock enabled.

If any key pressed while the Child Lock is enabled, an audible warning will be heard and the child lock icon will flash.

Child lock cannot be selected while the remote control function is enabled.

To enable Child Lock:

Press and hold the auxiliary function key 3 for three seconds. When the countdown “CL 3-2-1" on the

display ends, "CL On" (Child Lock On) icon will be displayed. When this warning is displayed, you can release

the auxiliary function key 3 .

To deactivate Child Lock:

Press and hold the auxiliary function key 3 for three seconds. When the countdown “CL 3-2-1" on the

display ends, "CL Off" (Child Lock off) icon will disappear.

• Wireless Connection

You can use the wireless connection function to pair your machine with your smart device. This way, you can use your smart

device to get information about your machine and control it.

To activate wireless connection:

Press and hold the auxiliary function key 1 for three seconds. After the countdown “3-2-1” on the

display, “Wireless Connection” symbol will be displayed. When this warning is displayed, release the

auxiliary function key 1 . The wireless connection icon will flash while the product is connecting to internet.

If the connection is successful, the icon’s light will remain on.

To deactivate wireless connection:

Press and hold the auxiliary function key 1 for three seconds. After the countdown “3-2-1” on the

display, “Wireless Connection” symbol will disappear.

CFor the wireless connection to be enabled, initial setup of the HomeWhiz application must be completed. After the setup, if

you press the auxiliary function key 1 while the programme selection knob is in “Download Programme” position, wireless

connection will be enabled automatically.

4.3.9 End Time

Time display

While the programme is running, the time remaining to the end of the programme will be displayed in hours

and minutes, e.g. “01:30”.

CProgramme time may differ from the values in section "Programme and consumption table" depending on the water

pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected

and the changes in the mains voltage.

With the End Time function, start of the programme can be delayed up to 24 hours. After pressing End Time button,

the programme's estimated end time will be displayed. If the End Time is set, End Time indicator will turn on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Grundig GWNE67E432 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Grundig GWNE67E432

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info