18
RECEPTION UNIT AND CHANNEL SELECTION
___________________
Selecting reception unit A or B
1 Using »A/B« or »OK« it is possible to switch between the reception units A and B (INPUT A
or INPUT B).
Note:
At the front panel of the satellite receiver the left green »
●●
« is lit if reception unit A (INPUT A) is
selected, the right green »
●●
« is lit if reception unit B (INPUT B) is selected.
Choosing a satellite channel
1 The channel position numbers can be entered directly using the numeric buttons »1...0« on
the remote control. Channel position numbers with several digits must be entered within a space
of 3 seconds.
2 The »P+/P– « buttons on the receiver or the »
,,..
« buttons on the remote control allow you
to scroll ste
p-by-step through the channel positions.
3 To fast scroll through the channel positions: keep the »P+/P– « buttons on the receiver or the
»
,,..
« buttons on the remote control pr
essed.
Note:
If there is no image on the screen of the TV set please check that the pre-programmed oscillator
frequency (e.g. 9.750 GHz for Astra and Eutelsat) conforms with the oscillator frequency of the
LNC used.
Correct the oscillator frequency of the LNC if necessary.
See page 38, under "LNC oscillator frequencies" in the “LNC set-up” sub-menu for information
on how this works.
