Bedienungsanleitung Gude 85056 (Seite 10 von 19) (Deutsch, Englisch)

628861

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Catalytic stove

An elegantly shaped heating stove using PB gas for

heating, to be used in well-ventilated spaces (minimum of

40 m³). The case is made of specially-layered sheet metal,

the front panel from a decoratively perforated sheet metal

for an even heat output. Not suitable for bathrooms,

bedrooms or as a permanent heating device in living

spaces.

EU – DECLARATION OF COMPLIANCE

The producer

Güde GmbH & Co. KG

Birkichstraße 6

74549 Wolpertshausen

Germany,

hereby confirms that the following appliances comply – on the

basis of their concept and their construction type and in

designs launched by us – to the appropriate basic

requirements of the directives of the European Community

concerning occupational health and safety.

In case of any change to appliances not approved by us

the Declaration is void.

Designation of the appliance:

Electro-catalytic stove “DUO PLUS”

Catalytic stove

Gas stove Blue Flame 4,2 KW

Item no.: 85023

85038

85056

Date/ producer’s signature: 27.05.2010

Data of the signed person: director

Mr. Arnold

Technical documentation: J. Bürkle FBL; QS

Respective EU directives:

EC Directive regarding Gas Appliance Guideline

2009/142/EC (ex 90/396/EEC)

Harmonization norms used:

EN 61000-3-2:2000

EN 61000-3-3:1995+A1:2001

EN 55014-1:2000+A1:2001+A2:2002

EN 55014-2:1997+A1:2001

Testing facility:

IMQ S.p.A. – Via Quintiliano 43 – Milano – Italy

Reference no.:

Item no.: 85023 – 51AP304

85056 – 51BM2110

85038 – 51AP304

Warranty

The warranty applies only to the defects relating to

material and production faults. In claiming a warranty

defect, the original proof of purchase must be presented.

Unqualified use, as for example overloading, use of force,

damage caused by third parties or objects, is excluded

from warranty. Non-compliance with the operating

instructions and ordinary wear and tear are also excluded

from warranty.

General safety instructions

Please read the instructions in full before first operation. In

case of any doubt about the connection and operation of

the device, please contact the producer (service

department).

TO GUARANTEE A HIGH LEVEL OF SAFETY, FOLLOW

THESE INSTRUCTIONS CAREFULLY:

 After unpacking, check that the device and all of its

parts are in perfect order.

 Pay attention to and take account of the

environment you are working in. Do not use

electric tools in wet or humid environment. Make sure

the lighting is adequate. Do not expose electric tools

to rain or high air humidity. Do not turn electric tools

on in an environment with highly flammable liquids or

gases.

 Prevent the access of unauthorized persons to

the device. Visitors and spectators, especially

children and ill persons, should not linger around the

workplace.

 Pay attention to the electric cable. Never pull at the

cable. To unplug the device, pull the cable by the

plug. The cable must not be placed near sources of

heat, oils and sharp edges.

 Prevent unintentional turning on. Always make

sure that the on/off switch of the device is in the off

position before plugging the device to the power

supply socket.

 Be careful in all situations. Always pay attention

to what you do. Use common sense. Do not use

electric devices and tools when you are tired.

 Be careful and pay attention to damaged parts.

Always inspect the tool before use. Are some parts

damaged? In case of light damage, ask yourself

seriously if the tool is still safe to use and functioning

safely.

 Prevent electric current injuries. Prevent any bodily

contact with an earthed object, e.g. water pipes,

radiators, cooking stoves and refrigerators.

 Warning! Use of accessories and extensions not

recommended explicitly in these instructions may put

persons and objects at risk.

 Make sure the plug is out of a socket before

performing maintenance or adjustment.

 Correct use of the device:

Always follow and keep all instructions from this

manual when operating the device. Prevent use by

children or persons who were not acquainted with its

function.

 Do not use the device when a defect or

malfunction has been detected.

If unusual sounds or strong vibrations occur during

operation which seem to suggest a malfunction, the

device must be immediately switched off and the

cause established by the nearest servicing shop.

 Use only original spare parts.

In case of use of spare parts by other manufacturers,

the warranty becomes void and malfunctions in the

appliance may occur. Original spare parts can be

purchased from our business partners.

 Do not make any alterations to the device.

Do not make any changes or alterations to the

device. All repairs must be performed by an

authorized servicing shop. Unauthorized change can

limit the output of the device but it can also cause

serious accidents if performed by persons without the

necessary technical knowledge.

 It is absolutely necessary to know the regulations and

directives for accident prevention valid in the place of

operation, as well as the other general safety rules.



This tool complies with all appropriate safety

regulations. Repairs can be pe

rform

ed only by

qualified electricians in authorized service shops,

using only the original spare parts. Non-compliance

may cause a danger of accidents.

Device-specific safety instructions

 The heating device can be used only in well-

ventilated spaces!

 The heating device must be installed with regard to

fire prevention.

 The heating device must not be covered with textiles

or other objects.

Gude 85056 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info