Bedienungsanleitung Gude BIG WHEELER 560 Mega B S 95125 (Seite 35 von 49) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

626212

Zoom out

Zoom in

Vorherige Seite

1/49

Nächste Seite

• Never let persons not familiarised with these

instructions work with the mower. The operator's age

can be limited by local regulations.

• WARNING — petrol is highly flammable.

o Store the fuel in containers designed for that

purpose.

o Add fuel outdoor only, do not smoke when adding

fuel.

o Add fuel before device starting. Never take the

cover out and do not add fuel when the engine is

running or hot.

o - If you spill the petrol do not try to start the device.

Take the device away and prevent generation of a

flammable source around the spilled petrol.

o Secure the petrol tank is closed safely.

• Always check whether the knife, knife bolts and cutting

equipment are not damaged or worn before using the

mower. Always replace any damaged and worn knives

and bolts in the entire set to prevent device unbalance.

Do not make any alterations to the safety device.

Regularly check their proper functioning.

• Keep the device clean, with no grass, leaves or other

impurities. Always wipe any oil or petrol run out. Let the

mower cool down before storing to closed spaces.

• Be especially careful when changing direction on a

slope.

• Never adjust the height of wheels when the engine is

running.

• The grass catching device may lose its functioning any

throw away items due to wear or damage. Regularly

check the mower parts and, if necessary, replace them

with spare parts recommended by the manufacturer.

• The mower knife is very sharp. Risk of injury! Be

especially careful at knife maintaining, wear protective

gloves or cover the knife-edges.

• Do not change the basic engine adjustment and avoid

its overloading.

• Be especially watchful when turning the mower or

pulling it towards your body.

• If it is necessary to incline or lift the mower to pass a

surface other than grass or when carrying the mower to

or from the area to be cut then cut off the knife.

• Release the knives and engine clutches before

switching on.

• Start the engine in accordance with the operating

instructions and make sure your legs are in safe

distance from the knife.

• Do not incline the mower at starting except for cases

when it is necessary. Do not incline the mower more

than necessary in such a case and always lift the part

reversed from you.

• Do not start the engine when standing in front of the

ejection outlet.

• Never lift and transfer the mower with engine running.

• Lower the brake adjustment when the engine is off. If

the engine is equipped with a stop valve then close the

petrol supply after cutting.

• Move slowly if using an auxiliary trail seat.

ASSEMBLY / PREPARATION

All assembly and/or maintenance works may be

performed only when the motor is turned off!

Please read the entire operating instructions before

assembling or starting your new mower.

IMPORTANT: The mower is supplied without oil and

petrol.

UNPACK THE MOWER

Take the mower out of the board and check whether there

are any free parts left there.

Wheel assembly (Fig. 5 a-f)

Install wheel at the lawn mower according to figures 5 a-f.

Pay attention to proper order of spacer disc at both

sides (fig. 5d)

Pay attention to that star-shaped screws are tightened

firmly enough (self-locking.

Assembly of collecting bag (Fig. 2) (Fig. 3) (Fig. 4)

1. Take the collecting bag, corresponding

frame and plastic insert out of the package.

(Fig. 2)

2. Put the frame into the collecting bag while

paying attention to that the coupling at the

frame is outside the collecting bag. (Fig. 3)

3. Now fix the collecting bag at the frame.

(Fig. 4)

Assembly - Handle

IMPORTANT: Disassemble the handle with care to prevent

clamping or damage of the cables.

1. Lift the handle until it snaps in the working

position.

2. Remove the protection sleeve, lift the upper parts of the

handle and assemble it with the bottom part. Tighten

the safety bolts on both sides of the handle.

3. Remove the protection sleeve of the operation grab handle in

the upper part.

Operation

Operation lever (for automatic stopping) (12) – press

the lever towards the handle when starting. If you want to

switch the engine off release the lever.

Drive lever (13) - used when you want the mower to be

moving forward.

Use

1. Cutting (without grass catcher)

The cut grass is laid in strips.

2. Cutting and collecting

The grass is collected to the grass catcher (if the grass

is damp or wet it reduces the catcher capacity). If you

want to mount the catcher to the mower lift the cover

plate and hang the grass catcher.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude BIG WHEELER 560 Mega B S 95125 Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info