Bedienungsanleitung Gude GF 600 94369 (Seite 9 von 48) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

626566

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

Introduction

To enjoy your new GARDEN CUTTER as long as possible,

please read carefully the Operating Instructions and the

attached safety instructions before putting the appliance into

operation. We also recommend keeping the Operating

Instructions for future reference.

We reserve making technical changes to improve the

appliance as part of the continuous product

development.

This document represents the original Operating

Instructions.

Any reprints, even partial, are subject to approval.

The machine

Light garden cutter with powerful 4-stroke engine. Robust

machine for light to medium-heavy soils. It is optimal for

cultivation of narrow plantations. Particularly calm and silent

operation. Weeding plough-blades made of special steel with

minimum wear ensure high efficiency. Thank to a special

cutter shape a considerate and efficient soil cultivation will be

ensured. Convenient operation thanks to the rotary wheel.

The system of start after pressing the button (weeding

plough-blades start running after activation of operating

button in resting state) improves the work safety in addition.

Scope of delivery (1)

1. Truck

2. Left handle (drive lever)

3. Drive lever

4. Depth limiter

5. Semibeam

6. Rotary wheel

7. Right handle (ON/OFF, speed)

8. Widening cleaver

9. Widening fender

Warranty

A warranty period of 12 months applies to commercial use

and 24 months apply to private use and commences on the

day of purchase of the device.

Warranty applies exclusively to failures due to defective

material or workmanship. An original sale slip with indication

of date of sale must be presented in case of claiming for the

warranty rights.

Warranty does not cover unprofessional use such as device

overload, violent use, damage caused by third party or foreign

materials, failure to comply with operations and assembly

manual, and normal wear and tear.

General safety instructions

It is necessary to read the whole guide for operation before

the first use of the machine. In case of any doubts associated

to the connection and operation of the machine contact the

producer (service department).

TO MAINTAIN THE HIGH LEVEL OF SAFETY PLEASE

OBSERVE THE FOLLOWING INSTRUCTIONS STRICTLY:

ATTENTION!

1. Pay attention to environmental conditions that you

work in. The engine driven machine starts producing

toxic gases after engine activation. These gases could

be invisible and without any smell. Therefore you must

never work with the machine in closed or badly

ventilated areas. Provide good illumination for your work.

If you cut in wet conditions, on snow or ice, in slopes or

in unlevelled terrain, ensure good stability.

2. Do not let foreign persons accessing to the machine.

Keep visitors and by-standers, especially children, sick

or weak persons, in a safe distance from your

workplace. Pay attention that other persons may not

touch the machine.

3. Ensure safe storage of tools. Machine that are not in

use store in a dry place at certain height if possible or

lock them so that they are not accessible to other

persons.

4. Use a proper tool for every work. Do not use e.g.

small machines or accessories for works that should in

fact be performed using heavy machines. Use machines

exclusively for purposes which they were designed for.

5. Care for suitable wear. Your clothing should be

purposeful and in may not constrain you in work.

6. Wear personal protective means. Wear safety shoes

with steel puffs and non-skid sole.

7. Wear protective glasses. Shooting up of objects by the

machine could occur.

8. Wear means for hearing protection. Wear personal

means for hearing protection like ear obturators.

9. Hand protection. Wear solid gloves – good protection is

provided by gloves made of chrome leather.

10. Transport. The garden cutter must be transported

always with the rotary wheel in transport position. When

machine is stand off pay attention that nobody could be

threatened. Secure the machine against tipping over,

damage and fuel leakage.

11. Remove wrenches etc. All wrenches etc. should be

removed before the machine is started.

12. Stay always attentive. Pay attention to what you do.

Follow your common sense when working. Do not

operate engine-driven machines when tired. Do not

operate the engine being under influence of alcohol,

drugs or medicaments that aggravate the ability to

concentrate.

13. Refilling the fuel. Before refuelling it is always

necessary to stop the engine. Open the tank cover

always carefully to allow the over-pressure ventilate

slowly to avoid squirting the fuel. When working with the

machine high temperatures are generated at the

machine body so let the machine cooled down before

refuelling otherwise fuel ignition could occur resulting in

serious burns. Be careful not to overfill the tank when

refuelling. If the fuel flows out nearby it must be removed

immediately and the machine must be cleaned. Check

firm settlement of screw cover after refuelling to avoid its

loosening due to vibrations during operation.

Behaviour in case of emergency

Provide necessary first aid treatment corresponding to the

injury nature and seek qualified medical help as soon as

possible. Protect the injured person from other injuries and

calm him/her down.

First aid kit must always be available in the place of your

work in case of accident in accordance with DIN 13164.

Material taken out of the first aid kit needs to be

supplemented right away.

If help is needed, please provide the following details:

5. Place of accident

6. Accident nature

7. Number of injured persons

8. Injury type

Gude GF 600 94369 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info