Bedienungsanleitung Gude GS4000 94621 (Seite 10 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Polnisch)

628258

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Thermal fuse

A probe automatically switching the pump off when specific

temperature is exceeded and on when the pump has cooled

down is assembled inside the electric motor. That manifold

increases the pump service life and prevents electric motor

burn-out.

Procedure:

The pump is put into operation when the plug is inserted in

appropriate socket and the floating switch is in the required

position (see the Instructions). If the pump is lifted or

transported, it is done with an assembled handle and not with

the connecting cable. If the pump is being plunged, a rope,

chain, etc. fastened to the handle need to be used if

necessary.

At muddy, sandy or siliceous soil the pump must be hung on

a rope or chain or put on a suitable wide baseplate to be able

to work plunged. Sand and other abrasive solids reduce the

service life of hydraulic parts and seal of the pump and

therefore they need to be prevented. In frost conditions, the

pump must be removed from the pumped liquid. It is

necessary to absolutely make sure the pump is not exposed

to a risk of frost. The pump must be emptied and stored at a

place protected against frost.

Attention! Important information for the customer

It is recommended to plunge or put the pump sideways in

the liquid. The body air cushion can thus be released and

the pump starts immediately working. The pump can

subsequently be stood straight.

Attention! Important information for the customer

To ensure long service life of the pump seal, we

recommend rinsing the pump with clean water in regular

intervals.

Automatic float

The float will automatically put the pump into operation when

the liquid level goes up or down. If the float cable is extended

or shortened, based on its support point, it will switch the

pump on or off due to the minimum or maximum height

required. The float cable is fixed to the pump handle with a

suitable pressure holder. Please check whether the float is

moving freely at pump operation. The pump must always be

rinsed with clean water when used in very dirty water. The

switching on and off heights can differ.

Thermal fuse/engine protection circuit-breaker

The drowned pump is equipped with an engine protection

circuit-breaker. If the engine is overheated, the engine

protection circuit-breaker will automatically switch the pump

off. Cooling time is app. 25 minutes, the pump subsequently

switches on. If the engine protection circuit-breaker switches

on, it is absolutely necessary to identify the cause and

remove it (see also the “Failure searching“). The given data

cannot be used for “family style“ repairs as it requires specific

professional knowledge. You must contact the customer

service department at any failures.

Residual risks and protective measures

Electric residual risks:

Threat Description Protective measure(s)

Direct

electric

contact

Electric shock Safety switch against FI stray

current

Indirect

electric

contact

Electric shock

through

medium

Safety switch against FI stray

current

Disposal

Instructions for disposal arise from icons placed on the

appliance or its package. The description of individual

meanings can be found in the “Marking on appliance“.

Requirements for operating staff

The operating staff must carefully read the Operating

Instructions before using the appliance.

Qualification

Apart from the detailed instructions by a professional, no

special qualification is necessary for appliance using.

Minimum age

Persons over 16 years of age can only work on the appliance.

An exception includes youngsters trained in order to reach

knowledge under supervision of the trainer during

occupational education.

Training

Using the appliance only requires corresponding training by a

professional or the Operating Instructions. No special training

is necessary.

Technical data

GS 4000

Voltage/Frequency 230 V / 50 Hz

Motor capacity P1 400 W

Maximum delivered quantity 7000 l/h

Maximum head of delivery 6 m

Maximum immersion 5 m

Hose connection 1¼’’

Protection class IPX8

Water temperature 35 °C

Granulation 30 mm

Max. suction 4,9 kg

Weight ca 94621

Transport and storage

At winter storing, it is necessary to make sure there is

no water in the appliance as the frost could damage the

appliance.

Safety instructions for first putting into operation

Attention: The pump must not run without fillings.

The user is responsible to third parties if pump (pumping

station, etc.) is used.

To be operated on connections with a safety switch

against stray current (RCD) only!

Before putting into operation, a competent electrician must

check whether electric safety devices are in place.

Electric connection to a socket.

Check the voltage. Technical data given on the type label

must correspond with electric network voltage.

If the pump is used in ponds, wells, etc. and appropriate pumping

stations, standards valid for pumps in the given country must

unconditionally be observed.

Electric pumps used outdoors (e.g. in ponds, etc.) must be

equipped with a H07RNF type rubber connecting cable,

according to DIN 57282 or DIN 57245 standards.

•

If the pump is in operation, neither people nor

animals can be present or plunged in the pumped

liquid (e.g. pools, cellars, etc.).

The temperature of the drained liquid must not exceed +35

°C. If an extension cable is used, it must solely be out of

Gude GS4000 94621 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info