Bedienungsanleitung Gude GSX 1100 (Seite 10 von 37) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

628271

Zoom out

Zoom in

Vorherige Seite

1/37

Nächste Seite

Any damaged or disposed electric

or electronic devices must be

delivered to appropriate collection

centres.

Package:

Protect against humidity This side up

Residual risks and protective measures

Electric residual risks

Threat Description Protective measure(s)

Direct

electric

contact

Electric shock Safety switch against FI stray

current

Indirect

electric

contact

Electric shock

through

medium

Safety switch against FI stray

current

Disposal

Instructions for disposal arise from icons placed on the

appliance or its package. The description of individual

meanings can be found in the “Marking on appliance“.

Requirements for operating staff

The operating staff must carefully read the Operating

Instructions before using the appliance.

Qualification: Apart from the detailed instructions by a

professional, no special qualification is necessary for

appliance using.

Minimum age: Persons over 16 years of age can only work

on the appliance.

An exception includes youngsters trained in order to reach

knowledge under supervision of the trainer during

occupational education.

Training: Using the appliance only requires corresponding

training by a professional or the Operating Instructions. No

special training is necessary.

Technical data

GSX 1100

Voltage 230 V/50 Hz

Motor capacity P1 1100 W/P1

Maximum immersion 8 m

Maximum delivered quantity 13000 l/h

Maximum head of delivery 9 m

Max. suction 30 mm

Hose connection 1“- 1 ½“ IG

Protection class IP X8

Water temperature 35 °C

Weight ca 6,6 kg

Order Nr. 94625

Transport and storage

At winter storing, it is necessary to make sure there is no

water in the appliance as the frost could damage the

appliance. Prior to transportation, it is necessary to unplug

the pump from the grid! The device has to be completely

emptied and stored with frost-proof protection. Adhesion of

mechanical seals can be prevented if you rinse the pump

with appropriate oil (for example, with vegetable oil).

Assembly and first putting into

operation

Screw the required hose connector (picture F) on the pump or

clamp it (truncate it to the desired connector diameter). Mount

the hose onto the connector and fasten it with a proper hose

clip or coupling.

Caution The shorter the hose is the higher transport output it

provides.

Safety instructions for first putting into operation

Attention: The pump must not run without fillings.

Do not use the pump for drinking water!

The user is responsible to third parties if pump (pumping

station, etc.) is used.

Before putting into operation, a competent electrician must

check whether electric safety devices are in place.

Electric connection to a socket.

Check the voltage. Technical data given on the type label

must correspond with electric network voltage.

If the pump is used in ponds, wells, etc. and appropriate pumping

stations, standards valid for pumps in the given country must

unconditionally be observed.

• If the pump is installed in a manhole has one, then close

the manhole with a lid to ensure the integrity of the

passers-by.

• The attachment of the outlet pipe is attached to suitable

(Pic. F).

• The max. Depth (see meet specifications).

• In sandy or muddy bottom, it is necessary to run the

pump on a rope or chain hanging to run or to set up

the pump on an appropriate substrate, to avoid

sinking to the suction part.

In the event of a leak of the oil tank, it is possible

that the contaminated water is contaminated.

Connecting cable for drowned pumps

The drowned pumps are equipped with a 10-m H07RNF

cable, depending on the type.

According to the valid regulation, drowned pumps with a

connecting cable length of less than 10 m can only be used

indoors for water drainage from cellars.

Therefore the cable length and type need to be considered at

purchasing.

Procedure:

Attention!

Important information for the customer

It is recommended to plunge or put the pump sideways in

the liquid. The body air cushion can thus be released and

the pump starts immediately working. The pump can

subsequently be stood straight.

Attention!

Important information for the customer

To ensure long service life of the pump seal, we

recommend rinsing the pump with clean water in regular

intervals.

Automatic float

The float will automatically put the pump into operation when

the liquid level goes up or down. If the float cable is extended

or shortened, based on its support point, it will switch the

pump on or off due to the minimum or maximum height

required. The float cable is fixed to the pump handle with a

suitable pressure holder. Please check whether the float is

moving freely at pump operation. The pump must always be

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GSX 1100 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info