Bedienungsanleitung Gude GWS 600 EC I 01845 (Seite 29 von 108) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

623621

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

GWS 600 EC I • GWS 700 EC I • GWS 600 EC I HM • GWS 700 EC I HM ENGLISH

of work of the operator.

Switch the machine o and unplug it when unatten-

ded.

Check all screw and plug-in connections and

protective equipment if  rm and tightened properly

and whether all moving parts are running smooth

whenever the appliance is to be put into operation.

The protective equipment on the appliance is

strictly prohibited to be disassembled, changed,

used in con ict with the designation and it is

prohibited to attach any protective equipment of

other manufacturers.

The machine must not be used under any

circumstances if the machine or the safety devices

are damaged.

Before use check machine, cable, and plug for any

damages or material fatigue. Repairs should only be

carried out by authorised Service Agents.

Any faults with the machine, including any related to

the safeguard or the saw blades, must be reported to

the persons in charge of safety as soon as the faults

are discovered.

Before pressing On/O , make sure the saw blade has

been  tted properly.

The saw must not be used any longer if the cradle fails

to automatically return to the rest position.

The saw must not be used any longer if the saw

blade fails to stop in 10 seconds after switching the

machine o .

For security, use devices such as safety- and pressure

device, guide slide, rip fence, etc.

Removing sawdust and chippings from the machine

when running is strictly prohibited.

It is necessary to refrain from removing any cuttings

and parts of workpieces from the cutting area.

Do not use saw blades which are damaged or

deformed.

Properly sharpened saw blades to be used only.

Follow instructions for use, adjustment and repair of

saw blades of manufacturers.

Do not use saw blades not corresponding to the key

data given in these instructions for use.

It is essential to adhere to the maximum speed speci-

 ed on the saw blade.

Only use tools that meet standard EN 847-1.

Transport and store the tools in a suitable container.

To minimise noise, the tool must be sharpened and

all noise reducing elements (covers etc.) must be

properly adjusted.

Replace the table insert when worn.

Familiarise with the safety procedures for cleaning,

maintenance and regular removal of sawdust and

dust to reduce the risk of  re.

Make sure the  ange used is suitable for the given

purpose of use, as speci ed by the manufacturer.

4) Use and treatment of electric tools

a) Do not overload the machine. Use appropriate

electric tools for your work. Working with appro-

priate electric tools is better and safer when within

the speci ed power range.

b) Do not use electric tools with a defective switch.

An electric tool that cannot be switched on or o is

dangerous and must be repaired.

c) Unplug the machine and/or remove the battery

before any machine adjustment, replacement of

accessory equipment and storing the machine.

This safety measure prevents unintentional star-

ting of the electric tool.

d) Keep any electric tool that is not being used out

of reach of children. The machine must not be

used by persons not familiarised with its use and

not having read these Instructions. Electric tools

are dangerous if used by inexperienced persons.

e) Treat electric tools carefully. Check whether the

moving parts work perfectly and do not drag,

whether not broken or damaged to such an

extent that functioning of electric tools could

be a ected. Have any damaged parts repaired

before using the machine. Poor maintenance of

electric tools is a cause of many injuries.

f) Keep the cutting tools sharp and clean. Carefully

treated cutting tools with sharp edges get stuck

less often and are easier to guide.

g) Electric tools, accessory equipment, extensions,

etc. to be used in accordance with these Instruc-

tions. Consider the working conditions and the

activity being performed. Using electric tools for

purposes other than those speci ed may lead to

dangerous situations.

5) Service

a) Have your electric tools repaired by quali ed

authorised sta only, using original spare parts

only. The safety of electric tools will be maintained

by this.

Safety instructions for circular saws

for  rewood

Operation is only allowed with a safety switch

against stray current (RCD max. stray current of

30mA).

The machine must be plugged to 400 Vwith 16

A fuse.

Wear ear protectors. Exposure to noise can cause

hearing loss.

Wear gloves when handling saw blades and rough

materials.

When being operated, the machine must stand on a

horizontal and  at surface and the  oor around the

machine must be  at, well-maintained and with no

waste, such as sawdust and cuttings.

The processed bundle of workpieces and  nished

workpieces should be placed near the standard place

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude GWS 600 EC I 01845 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info