623621

Gude GWS 600 EC I 01845 Seite 30

30
Zoom out
Zoom in
Vorherige Seite
1/108
Nächste Seite
GB
26
GWS 600 EC I • GWS 700 EC I • GWS 600 EC I HM • GWS 700 EC I HM ENGLISH
Use only original accessories and original spare parts.
Switch the machine immediately o when blocked.
Unplug the machine and remove the stuck piece of
wood.
Handling equipment to be used only when handling
the machine.
The machine has been designed for DIY to cross
cut  re wood.
Cutting logs with diameter of more than 220 or 240
mm (depending on the model) is not allowed as
such workpieces would not be safe to hold.
The minimum diameter is 80 mm (pieces of wood
with a smaller diameter cannot be caught to barbs
and may slip o the cradle).
Workpiece diameter:
Minimum 80 mm
Maximum 220 or 240 mm
The maximum length of the material cut is 1,000
mm and the minimum length of the material cut is
500 mm.
As there is no exhauster, the circular saw for  re
wood may only be used outdoors.
Only such workpieces that can be safely laid and
held in the cradle may be processed.
Using HSS saw blades is not allowed as such steel is
hard and fragile.
Risk of injury as a result of saw blade breaking and
saw blade pieces being thrown away.
The use in accordance with the designation also
includes the satisfaction of manufacturer-speci ed
conditions for operation, maintenance and repairs
and following safety instructions included in the
manual.
It is necessary to follow the safety regulations
applicable for operation and other generally recog-
nised occupational therapy and safety technique
regulations. Any other use is considered a use in
con ict with the designation. The manufacturer will
not be held liable for any consequential damage of
any type: the risk will be borne by the user.
Optional changes to the saw exclude the liability
of the manufacturer for consequential damage of
any type.
The saw may only be made ready, used and
maintained by persons familiarised with such acts
and instructed in possible risks. Repairs may only be
executed by us or by customer services speci ed by
us. The machine must not be used in an explosion-
risk environment and must not be exposed to rain.
Metal parts (nails, etc.) must necessarily be removed
from the material cut.
Safe removal of possible blocking
Unplug the machine.
Check it and localise the blocking.
Remove the blocking while considering all safety
instructions.
Check the machine visually and make sure it is not
damaged. In particular, the saw blade must not show
any sign of damage.
Contact the Technical Assistance (see Servicing) if
there is any doubt regarding the blocking removal or
full operability.
Maintenance
Treatment, maintenance and cleaning may only be
performed when the drive is o and the machine idle.
The drive must necessarily be turned o when the
machine is not working properly.
• Check all screw and plug-in connections and pro-
tective equipment if  rm and tightened properly
and whether all moving parts are running smooth
whenever the appliance is to be put into operation.
• Prior to every use, visually check the machine to
rule out any defects, in particular on the power
cable and the plug.
• Before pressing On/O , make sure the saw blade
has been  tted properly.
At all times, keep the machine, ventilation slots, in
particular, clean. The sawdust ejection and/or dust ex-
hauster should be cleaned at regular intervals. Never
spray water on the machine!
All moving parts should be treated with environmen-
tal-friendly oil. Never use any grease!
Check the wear of the saw blade. Blunt saw blades
must be sharpened. Clean saw blades covered with
resin.
The ball bearings of the saw shaft are protected
against dust and are therefore service-free, i.e. the
bearings need not be lubricated.
Repairs and works speci ed in these Instructions may
only be performed by quali ed authorised sta .
Use only original accessories and original spare parts.
Only a regularly maintained and treated appliance
can serve as a satisfactory aid. Insu cient mainte-
nance and care can lead to unforeseen accidents and
injuries.
… 30 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Gude GWS 600 EC I 01845 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info