Bedienungsanleitung Gude HKS 1200 58045 (Seite 14 von 48) (Deutsch, Englisch)

624908

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

If you want the saw jammed in the workpiece to start again, centre the circular saw blade in the cutting gap and check whether

the saw teeth are not seized in the workpiece. In case the circular saw blade is jammed, it can move outwards off the workpiece

or cause backlash if you want to start the saw again.

Support large boards to reduce the backlash risk as a result of the circular saw blade being jammed. Large boards might bend

under its weight. Boards must be supported on both sides, both near the cutting gap and on the edge.

Do not use circular saw blades that are blunt or damaged. Circular saw blades with blunt or poorly balanced teeth lead to

increased friction, jamming of the circular saw blade and backlash due to too narrow cutting gap.

Fix the set cut depth and cut angle before you start cutting. If setting changes during the cutting process, the circular saw blade

can get jammed and cause backlash.

Be especially careful at “inside cuts“ to existing walls or other sections that cannot be seen. A circular saw blade getting inside

can get blocked and cause backlash when cutting into hidden objects.

Before using the appliance you should check whether the bottom protection cover closes properly. Do not use the saw if the

bottom protection cover does not move freely and does not close immediately. Never fix the bottom protection cover in an open

position. If the saw falls on the floor in an uncontrolled manner, the bottom protection cover can get bent. Open the protection

cover with a return lever and make sure it moves freely and touches neither the circular saw blade nor other parts at any angle.

Check the function of springs for the bottom protection cover. If the bottom protection cover and springs do not work perfectly,

have a maintenance check of the saw before using it. Parts that are damaged, sticky deposits or splinter clusters slow the

working of the bottom protection cover.

Open the bottom protection cover with your hand only for special cuts like for example the “inside and angular cuts“. Open the

bottom protection cover with a return lever and keep it open until the circular saw blade gets inside the workpiece. The bottom

protection cover must work automatically for other cutting processes.

Do not put the saw on a work table or ground without the bottom protection cover covering the circular saw blade. A circular saw

blade that is unprotected and coasting moves the saw against the cutting direction and cuts everything it can. Observe the saw

coasting time.

Do not touch the splinter ejection hole with your hands. You can get injured by the rotating parts.

Do not work with the saw above your head. You do not have sufficient control of the saw in this position.

Use appropriate detectors for searching for hidden power lines or contact your local electrical energy supplier. Any contact with

the power line can cause fire and electric shock. Damage to the gas line can lead to explosion. Breaking into the water pipeline

can lead to damage or electric shock.

Do not work with the saw on the spot. The saw has not been designed for operation with the saw table.

Do not use circular saw blades out of HSS (high alloy steel for quick cuts). These circular saw blades can easily break.

Do not cut ferrous metals. Hot splinters can cause the dust catcher to ignite.

Hold the saw with both hands and secure a safe posture when working. The saw is guided safer with both hands.

Secure the workpiece. A workpiece caught in clamping devices or a vice is held safer than with your hand.

Do not put the saw aside until it stops. The extension can get jammed and lead to loss of control of the saw.

Do not use the saw if the cable is damaged. Do not touch a damaged cable and pull the plug out of socket if the cable gets

damaged during work. A damaged cable increases an electric shock risk.

Behaviour in case of emergency

Provide necessary first aid treatment corresponding to the injury nature and seek qualified medical help as soon as possible.

Protect the injured person from other injuries and calm him/her down.

Work with the hand-held circular saw

- The swivelling protection cover is automatically drawn back from the workpiece.

- Proceed smoothly and uniformly forward with the circular saw.

- Waste must be on the right to the circular saw so that the wide part of the support table could fit with its entire surface.

Technical specification

Appliance: HKS 1200 hand-held

circular saw

Voltage/frequency: 230V~50Hz

Engine power: 1,200W

Revolutions: 4,500 min

Circular saw blade

dimensions:

185mm/20mm

Cutting power 90°/45° 66mm/44mm

Noise: L

105dB

Weight: app. 8kg

Order No. 58045

Circular saw blades appropriate to the HKS 1200 hand-held circular saw

Hard-metal circular saw blade, 185 x 20 mm, 24 teeth, order No. 58337

Hard-metal circular saw blade, 180 x 20 mm, 30 teeth, order No. 58338

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude HKS 1200 58045 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info