Bedienungsanleitung Gude Pro 150 PRO 75170 (Seite 19 von 26) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

629048

Zoom out

Zoom in

Vorherige Seite

1/26

Nächste Seite

Supply includes

Picture 1:

1. Control lever

2. Exhaust throat

3. Compressed air inlet

4. Eccentric sheave

5. Control regulator

Appliance

150 PRO PNEUMATIC ECCENTRIC GRINDING MACHINE

Professional pneumatic eccentric grinding machine with

a foul air hose suitable for grinding of jointing and enamel material and

fine grinding of wood pr plastic material.

EU Declaration of Conformity

We, Güde GmbH & Co. KG Birkichstraße 6, 74549 Wolpertshausen,

Germany, hereby declare the conception and construction of the below-

mentioned appliances correspond - at the type of construction being

launched - to appropriate basic safety and hygienic requirements of EC

Directives.

In case of any change to the appliance not discussed with us the

Declaration expires.

Marking of appliances: 150 PRO Order No. 75170

Date/producer signature: Oct 14, 08

Signed by: Mr Arnold, Managing Director

Appropriate EU Directives:

98/37/EG;

Harmonised standards used:

DIN EN 792-8; DIN EN /SO 8662-8; DIN EN /SO 3744; EN / SO

15744; EN 28662-1

Technical data

150 PRO

Service pressure 6.3 bar

Air consumption 113 - 420 l/min

Air connector-thread ¼”

Max. free-running revs 10000 U/min

Recomm. hose cross sect. 10 mm

Grinding surface ∅ 150 mm

Lwa noise data 79 dB

Weight 0.85 kg

Vibration acceleration 0.8 m/sec²

Order No. 75170

General safety instructions

Safety notice! Failing to follow these

instructions can cause an injury to you

or other persons.

1. Read the following Operating Instructions

for using the pneumatic appliance and

follow the safety instructions for using the

pneumatic appliance.

2. ALWAYS wear approved protective

glasses, earphones and a respirator.

3. Take off your watch, rings and other

disturbing items. Loose clothes or jewellery

can get caught in the compressor and can

lead to serious injuries.

4. Use hose piping.

5. The control lever MUST be in the “OFF“

position if the appliance is connected with

the air supply.

6. Disconnect the appliance from air supply if

not used. NEVER replace any parts of the

accessories or SERVICE them if the

appliance is connected with the air supply.

7. Ensure a safe distance. Make sure you

did not lose balance.

8. Ensure that your hands could freely

move while working on the appliance

to be able to execute the work safely.

9. Use the appliance only at a speed for

which it has been designed.

10. Properly maintain the appliance and

follow all instructions for appliance

lubrication and maintenance.

11. Do not damage the hoses and

connecting pieces by carrying the

appliance with its hose or by

disconnecting the hose from the air

supply by pulling. Prevent the hose

from coming into contact with high

temperatures, oil and sharp edges.

The hose should be replaced if

damaged or worn out.

12. Store cleaning cloths and other

combustible materials in secured metal

containers. The containers must be

disposed according to local, national or

regional regulations.

13. NEVER operate the appliance with an

air pressure higher than 9 bar. Use the

pressure regulator that will reduce the

air pressure to 6 bar.

14. ALWAYS work with the appliance in a

safe distance from people and

animals.

15. Make sure the speed of turning of

accessory parts corresponded to the

speed of turning of the eccentric

grinding machine or was higher.

Before starting

Air supply

Important information on the appliance can be

found in model specifications.

Lubricate the appliance before putting it

into operation (see the Maintenance).

Assembly

Always disconnect the hose for air supply

before assembly or disassembly of grinding

wheels and extensions.

1. Assemble the wheel with an emery paper

on the eccentric grinding machine

extension by sticking the wheel with an

emery paper on the round extension of the

grinding machine (grinding wheels with a

Velcro fastener can be received at Güde

as accessories).

NOTICE: Before storing the eccentric

grinding machine, remove the used wheels

with an emery paper as removing of a

used emery paper after a longer period of

time is very difficult.

2. Connect the exhaust hose to the exhaust

throat.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude Pro 150 PRO 75170 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info