Bedienungsanleitung Gude Pro PRS 700 75772 (Seite 13 von 80) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

629054

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

Behaviour in case of emergency

In case of accident, first aid kit must always be available in

the place of your work in accordance with DIN 13164.

Material taken out of the first aid kit needs to be

supplemented right away.

If help is needed, please provide the following details:

Place of accident

Accident nature

Number of injured persons

Injury type

Provide necessary first aid treatment corresponding to the

injury nature and seek qualified medical help as soon as

possible. Protect the injured person against other injuries

and calm him/her down.

Disposal

Disposal instructions are illustrated in the form of

pictograms on the device or packaging. Description of the

pictograms is given in "Identification" chapter.

Disposal of transport packaging

Packaging protects the device against damage during

transport. Packaging materials are usually selected

according to their effect on environment and disposal

methods and can therefore be recycled.

Returning of the packaging back to circulation saves

resources and costs for packaging disposal.

Parts of the packaging (e.g. foil, styropor) may be

dangerous for children. Risk of suffocation!

Keep these parts of the packaging out of reach of children

and dispose as soon as possible.

Operator requirements

The operator must carefully read the Operating

Instructions before using the appliance.

Qualification

No special qualification is necessary to use the appliance

apart from detailed instructions by an expert.

Minimum age

The appliance may only be operated by persons over 18

years of age who have been instructed in handling and

operating the appliance. Young people between 16 and 18

years of age may only work with the appliance when

supervised by an adult.

Training

Using the appliance only requires appropriate instructions

by an expert or reading the Operating Instructions. No

special training necessary.

Installation and first putting into operation

Safety instructions for first putting into operation

If the saw is defective, it may only be repaired by

authorised service staff. Original spare parts to be used

only.

We would like to inform you that according to

applicable standards we do not take any

responsibility for a damage possibly caused by our

machines in the following cases:

It is allowed to cut wood with maximum diameter of

to prevent dangerous reversed cutting.

The minimum diameter is 80 mm.

Unauthorised repairs executed by unauthorised service

staff.

Use in conflict with the designation or more precisely a

failure to meet the use as designated provisions.

Saw overloading by continuous operation.

This machine has not been designed to be used by

persons (including children) with any physical, sensory or

mental limitation. Also persons with a lack of experience

and/or knowledge of the machine are prohibited to work

with the machine, unless their safety is supervised by a

competent person or unless such persons have received

instructions from such competent person on how to use

the machine. Children must be watched to make sure they

do not play with the machine.

Warning instruction:

Extension cable with a cross section of 1.5 mm² and 2.5

mm² from the length of 20 m.

Never start the machine when being stopped.

Starting interval of at least 1 minute.

Caution:

1. To make sure the brake switch works as it should, it

is absolutely necessary to use a cable with 5 cores.

2. Never start the machine again when being stopped.

DO NOT USE circular-saw blades made of high-alloy high-

speed steel.

Use only circular-saw blades meeting the EN 847-1

standard with details on the manufacturer and dimensions

meeting the requirements for a circular-saw blade. Make

sure the circular-saw blade is always sharpened and has a

sufficient wheelbase.

The specified circular-saw blade for cradle circular

saws with tilting table has the following details:

Diameter: 700 mm

Drilling: 30 mm

Thickness: 3.2 mm

Tooth shape: Hard-metal flat tooth

Emergency switch

The machine has been fitted with an emergency switch.

After pressing the switch, the power supply to all machine

drives is immediately interrupted and the brake activated.

- Interruption of power supply to brake after braking is

finished.

Electrical safety:

CAUTION! Electric shock!

There is a risk of electric shock!

Unplug the machine before removing any failures and

servicing the machine.

To be used on connection with a safety switch against

stray current (RCD) only!

Please ask an electrician.

The type label details must correspond to the electrical

network details.

Protect the cable against excess temperatures, oil and

sharp edges.

Operation

If the table does not automatically return any longer as the

spring is worn out or defective, cutting must be stopped

until the spring is repaired or replaced.

The clamping tip and cover of the circular-saw blade have

been fitted with gear teeth preventing the cut material from

spinning. When cutting, the cut material is put on the saw

table and the right hand presses the clamping tip down.

Right hand can be relieved by shifting the table with your

thigh. After cutting is finished, the table on ball bearings is

returned back to the initial position by spring tension.

Gude Pro PRS 700 75772 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info