Bedienungsanleitung Gude WS 125-1150 E 58108 (Seite 19 von 100) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Türkisch)

624890

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

ENGLISH

The machine is suitable only for working without

water.

Do not use this product in any other way as stated for

normal use. Not observing general regulations in force

and instructions from this manual does not make the

manufacturer liable for damages.

Emergency procedure

Conduct a rst-aid procedure adequate to the injury

and summon qualied medical attendance as quickly

as possible. Protect the injured person from further

harm and calm them down. If you seek help,state the

following pieces ofinformation: 1. Accident site, 2.

Accident type, 3. Number of injured persons, 4. Injury

type(s)

Symbols

WARNING / Caution!

Read the operating instructions to reduce

the risk of injury.

Wear eye protective goggles !

Wear ear protectors!

Wear gloves!

Unplug the machine before any work

on it.

Keep bystanders a safe distance away

from work area. Anyone entering the

work area must wear personal protective

equipment.

Class II tool.

CE marking

Any damaged or disposed electric or

electronic devices must be delivered to

appropriate collection centres.

WARNING

Read all safety warnings and all

instructions. Failure to follow the warningsand

instructions may result in electric shock, re and/or

serious injury.

Save all warnings and instructions for future

reference.

Angle Grinder Safety Warnings

Safety Warnings Common for Grinding, Sanding or

Abrasive Cutting-O Operations:

a) This power tool is intended to function as a

grinder, sander, wire brush or cut-o tool. Read

all safety warnings, instructions, illustrations and

specications provided with this power tool. Fai-

lure to follow all instructions listed below may result

n electric shock, re and/or serious injury.

b) Operations such as wire brushing and poli-

shing are not recommended to be performed

ith this power tool. Operations for which the pow-

er tool was not designed may create a hazard and

cause personal injury.

c) Do not use accessories which are not speci-

cally designed and recommended by the tool

anufacturer. Just because the accessory can be

attached to your power tool, it does not assure safe

operation.

d) The rated speed of the accessory must be at

least equal to the maximum speed marked on the

power tool. Accessories running faster than their

rated speed can break and y apart.

e) The outside diameter and the thickness of

your accessory must be within the capacity rating

of your power tool. Incorrectly sized accessories

cannot be adequately guarded or controlled.

f) Treaded mounting of accessories must match

the grinder spindle thread. For accessories

mounted by anges, the arbour hole of the

accessory must t the locating diameter of the

ange. Accessories that do not match the mounting

hardware of the power tool will run out of balance,

vibrate excessively and may cause loss of control.

g) Do not use a damaged accessory. Before each

use inspect the accessory such as abrasive wheels

for chips and cracks, backing pad for cracks, tear

or excess wear, wire brush for loose or cracked wi

res. If power tool or accessory is dropped, inspect

for

damage or install an undamaged accessory.

After inspecting and installing an accessory,

position yourself and bystanders away from the

plane of the rotating accessory and run the power

tool at maximum noload speed for one minute.

Damaged accessories will normally break apart during

this test time.

h) Wear personal protective equipment. De-

pending on application, use face shield, safety

ggles or safety glasses. As appropriate, wear

dust mask, hearing protectors, gloves and shop

apron capable of stopping small abrasive or

workpiece fragments. The eye protection must

be capable of stopping ying debris generated by

various operations. The dust mask or respirator must

be capable of ltrating particles generated by your

operation. Prolonged exposure to high intensity noise

may cause hearing loss.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gude WS 125-1150 E 58108 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info