Bedienungsanleitung Gys TIG 207 AC-DC HF FV (Seite 10 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

665712

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

10/64

DESCRIPTION

Thank you for choosing this GYS machine! To get the most out of your purchase, please read the following

information before using the machine.

The TIG 207FV/208 is a portable, single phase, ventilated Inverter welding unit to be used with non-

consumable electrode (TIG) in direct (DC) or alternative (AC) current. TIG welding requires a gaseous

protection (Argon). In MMA mode, it allows you to weld with any kind of electrodes: rutile, basic, stainless

steel or cast iron. The TIG 208 has an integrated liquid cooling system. The TIG 207FV-208 can be equipped

with a remote control or foot pedal. (This is available separately as an option)They work with a single phase

230V input for the TIG 208, a single phase input spread between 85V to 265V for the TIG 207 FV. They are

protected for a use on electric generators.

POWER SUPPLY – STARTING UP

• This device is delivered with a plug 16A type CEE7/7. The 208 must be connected to a socket 230V (50-

60Hz) WITH earth. The 207FV integrates a « Flexible Voltage » system and can be used on a

power

supply variable between 85V and 265V (50 – 60 Hz) WITH earth. The absorbed current (I1eff) is

indicated on the device, for its maximum setting. Check that the power supply and its protection (fuse

and/or circuit breaker) are compatible with the current needed by the machine. In some countries, it may

be necessary to change the plug to allow the use at maximum settings.

• The starting up is made by pushing on the standby button .

• The device turns into protection mode if the power supply tension is over 265V. To indicate this default,

the screen displays

. Once in protection mode, you have to unplug the device and plug it back on a

socket delivering the correct tension.

• Ventilator: in MMA mode, the ventilator operates permanently. In TIG mode, the ventilator only operates

during the welding phase, and then stops after cooling.

• These are Class A devices. They are designed to be used in an industrial or professional environment. In a

different environment, it can be difficult to ensure electromagnetic compatibility, due to conducted

disturbances as well as radiation. They comply with the norm IEC 61000-3-12.

WELDING WITH COVERED ELECTRODE (MMA MODE)

Getting Started

• Connect the electrode holder and earth clamp to the corresponding sockets.

• Ensure that the welding polarities and intensities indicated on the electrode packaging are observed.

• Remove the electrode from the electrode holder when the machine is not in use.

Integrated welding assistance

Your device is equipped with 3 specific functions :

Hot Start gives an adjustable* overcurrent at the beginning of welding.

Arc Force delivers an overcurrent which avoids sticking when the electrode enters the welding pool.

Anti-Sticking allows easy removal of the electrode in case of sticking.

Selection of process and current setting

1- Select MMA mode

2- Select the wanted current thanks to the potentiometer.

Adjustable* Hot Start

The Hot Start is adjustable (between 0 and 60%) within the limit of 160A.

1- Press and hold the “Hot Start” button.

2- Select the required setting.

N.B. : the display "HI" indicates that the Hot Start is at maximum.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Gys TIG 207 AC-DC HF FV Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info