Bedienungsanleitung H2o Steam FX (Seite 5 von 6) (Englisch)

573463

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

INSTRUCTION FOR ASSEMBLY

WARRANTY

ONE YEAR LIMITED WARRANTY

H2O SteamFX™

The H2O SteamFX™ is warranted, to the original owner, for one (1) year from the date of purchase against defects in material and

workmanship under normal use and service. Should your H2O SteamFX™ prove defective within one (1) year from date of purchase, please

contact customer service immediately at the number provided below.

Please package your H2O SteamFX™ carefully to avoid damage in transit. Under this warranty, Thane Direct will repair or replace any unit

found to be defective. This warranty is effective only if the product is purchased and operated in the USA. This warranty extends only to

personal use and does not extend to any product that has been used in a manner for which it is not intended. There are no warranties other

than that expressly set forth herein. This warranty is not transferable.

Thane Direct is not responsible or liable for indirect, special or consequential damages arising out of or in connection with the use or

performance of this product or other damages with respect to any economic loss, loss of property, loss of revenues or profits, loss of enjoyment

or use, costs of removal, installation, other consequential damages of whatsoever nature, failure to follow instructions or warnings in this

User’s Guide or use of the product in a manner for which it was not designed.

THIS WARRANTY DOES NOT APPLY TO THE FOLLOWING:

1. Damage due to accident, misuse, abuse or vandalism.

2. Improper or inadequate maintenance.

3. Unauthorized modification.

4. Damage in return transit.

5. Normal wear of parts (wear & tear that occurs over time and with use) including

chips, scratches, abrasions, discoloration or fading.

6. Repairs made by an unauthorized service technician.

TO OBTAIN SERVICE: The original purchaser should immediately contact our customer service representatives at 1-888-788-2808 and

depending on the extent of the service requested, the purchaser shall have the obligations and responsibility to:

• Pay for all service and parts not covered by the warranty.

• Prepay the shipping and handling.

• Carefully package the product using adequate padding material to prevent

damage in transit. The original container is ideal for this purpose.

• Include in the package: the owner’s name, address, telephone number, and

a detailed description of the problem.

• Provide the proof of purchase, which includes date of purchase.

• Send via Insured* Parcel Post or courier to: Thane Direct.

• Or otherwise as instructed by customer service.

FOR ANY INQUIRES, PLEASE CONTACT THANE DIRECT CUSTOMER SERVICE

AT THIS TOLL FREE NUMBER 1-888-788-2808

*Thane Direct is NOT responsible for any non-insured items lost in transit

1. Unplug Power Cord from the electrical outlet and allow the appliance to cool down.

2. Always empty the Water Tank at the end of each use.

3. Wipe all surfaces of the appliance with a soft cloth.

4. Store in a protected and dry area.

1. Insert the jet nozzle into the steam outlet, and then turn the locking system to secure the jet nozzle in place.

AFTER USE

1. Unscrew the Water Tank Cap, and use the measuring cup to put 225ml/7.5oz of water into the water tank, and then secure the cap in place.

Please follow the Lock & Unlock marking on the Water Tank Cap.

2. Plug the appliance into an electrical outlet. The Indicator Light will turn ON.

3. Wait approximately 20-30 seconds. When the steamer is ready to emit steam the Indicator Light will turn OFF. Press and hold the Steam Switch

to emit steam.

4. Slowly Pass over the surface to be cleaned.

Note: During the usage the Indicator Light will turn ON when the appliance re-heats and will turn OFF again once it reaches the operating

temperature. However, the appliance will continuously emit steam, as long as the Steam Switch is pressed and water tank filled with water,

regardless if the Indicator turns ON.

Do not touch the nozzle or any other attachments as they can get hot.

5. To stop emitting steam release the Steam Switch button.

After the Steam Switch is turned OFF steam will continue to flow for a short period of time (approximately

10 – 15 seconds) until all steam inside the entire system is released.

6. When the appliance stops emitting steam it means that the Water Tank needs to be refilled. Release the Steam Switch button and unplug the

appliance from the electrical outlet. Please fill the Water Tank with water as described in step 1 and then follow steps 2-4 above.

INSTRUCTIONS FOR USE

IMPORTANT

D E F

A B C

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

H2o Steam FX Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info