Bedienungsanleitung Haas-Sohn KOMFORT-IV (Seite 3 von 12) (Englisch)

811882

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

1.Description

Fireplace inserts are highly suitable for the heating

of living and working rooms.

The stove body consists of a welded steel

structure. At the bottom is a wood storage

compartment and above it the ash box, on top of

that the firebox and a heat exchanger at the top.

Between the latter the smoke gas draughts are

arranged above the firebox.

Heating the room air and creating a comfortable

living climate in connection with a covering is

substantially achieved through convection heat.

Because of this you can rapidly heat even cool

rooms that have not been heated for an extended

period of time. The room air enters the wood

storage compartment, is heated in the convection

duct between inner body and outer wall as it rises

and flows out again through openings provided at

the top of the stove. The component of radiation

heat is obtained through heat radiation in the area

of the view window of the firebox door from the

metal surfaces of the stove and - if available - from

the ceramic surfaces on the sidewalls.

2. General instructions, safety instructions

Adhere to national and European standards, local

regulations, planning and building regulations as

well as fire safety regulations. When installing your

stove you must observe the fire prevention

regulations and the national building regulations

applicable at the place of installation in agreement

with the responsible master chimney sweep of the

district. He will also inspect the appropriate

connection of the device to the chimney.

Prior to installation, verify that the carrying capacity

of the substructure is suitable to support the

heating insert. If the carrying capacity is

insufficient, suitable measures (e.g. slab for load

distribution) have to be taken to achieve this.

Your fireplace insert has been subjected to all

inspections required by the legislator. It meets the

specified characteristics in terms of firing efficiency

and smoke gas emissions.

Your fireplace insert of design 1 described in this

Manual has been tested according to DIN 18895

("Fireplace inserts for solid fuels") and EN13229.

The fireplace inserts of design 1 (see Equipment

plate) may be connected to a multiple-use chimney

if the chimney dimension according to DIN 4705

Part 2 allows this.

The fireplace insert is a limited time burning

fireplace.

Basic requirement:

- Ensure that the entire structure, i.e. also

connecting pieces and chimney, are

operationally safe and fireproof and can be

cleaned without effort!

Place of installation:

- Fireplace inserts must only be installed in

rooms and in places where, according to

position, structural circumstances and type of

use no hazards will develop. In the installation

area of the covered heating insert no electrical

wiring must be present in walls and ceilings. In

particular there must be an adequate inflow of

air for combustion in the installation rooms.

The surface area of the installation room must

be configured and of a size that allows proper

operation of the fireplace.

- Fireplace inserts must not be installed in:

staircases (except in residential buildings with

more than two apartments); generally

accessible hallways; rooms in which easily

flammable or explosive substances or mixtures

are processed, stored or produced in such a

quantity that hazards are created through

ignition or explosion; rooms or apartments

from which air is removed through ventilation

systems or warm air heating systems with the

help of fans, unless the operation of the open

fireplace without danger is ensured.

- The operation of open fireplaces is not

threatened if the systems circulate air only

within a room, the systems have safety

devices which automatically and reliably

prevent vacuum in the room of installation or

the volumetric combustion airflows required for

the fireplace inserts and the volumetric flows of

the ventilation systems despite adjustment or

removal of easily accessible control devices of

ventilation systems altogether will not bring

about a vacuum in the installation rooms of the

fireplace inserts and the rooms of the

combined ventilation greater than 4 PA.

3. Combustion air supply:

Ensure that the fireplace will have a minimum

inflow of 360 m³/h of combustion air per each m² of

firebox opening from the outside. Ask your master

chimney sweep responsible for your district.

Installation rooms of fireplace inserts must:

- Have at least one door into the open or which

are connected with other rooms of this type.

Only rooms of the same apartment or

utilization unit apply. If this is not sufficient, the

installation room must have a combustion

airline leading into the open and the firebox

opening with at least 360 m³/h of combustion

air for each m². If there are other fireplaces in

the same combustion air system, there must

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Haas-Sohn KOMFORT-IV Seite 3

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Haas-Sohn KOMFORT-IV

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info