Bedienungsanleitung Hako Citymaster 1250 (Seite 10 von 154) (Englisch)

627526

Zoom out

Zoom in

Vorherige Seite

1/154

Nächste Seite

Safety Information

1.2 General information

• In addition to the information in this

operating manual, the general, legal-

ly applicable industrial safety and ac-

cident prevention regulations must

also be observed.

• Before starting up the vehicle for the

first time, read the operating manual

supplied with it thoroughly as well as

any separate manuals provided with

additional or attachment devices,

and observe all the information when

working.

• The machine may only be operated,

serviced and repaired by personnel

trained by Hako technical experts.

• Particular attention should be paid to

the information regarding safety.

Technical expertise is the key to pre-

venting errors when operating the

equipment and for ensuring trouble-

free operation.

• The operating manual must always

be kept at the operating location of

the vehicle and, therefore should be

kept in a safe place on the vehicle.

• If the machine is sold or leased, this

documentation as well as the regis-

tration certificates are to be handed

to the new owner/operator. The

transfer should be confirmed!

• The warning labels attached to the

equipment provide important infor-

mation concerning safe operation.

Labels which are illegible or missing

must be replaced.

• Registration certificate 1 (vehicle li-

cense) and the operating manual

have to be available at all times at

the location where the machine is

operated and should therefore be

carefully stored near the driver's

seat.

• Original spare parts must be used to

ensure safety.

• The Hako-Citymaster 1250 is

equipped with a safety cabin (ROPS

= Roll Over Protection Structure) ac-

cording to 86/298/EEC

1.3 Operating information

• Check the operational safety of the

vehicle each time before starting it

up! Clear any faults immediately!

• During operation a first aid kit and an

advance warning triangle has to be

carried.

• Before starting work, the operator

must be fully familiar with all fea-

tures, operating and control ele-

ments as well as their functions.

Once the vehicle is actually in opera-

tion it is too late to do this !

• The effectiveness of steering and

brakes has to be checked daily at a

safe location before starting work.

• Always wear heavy duty, non-slip

footwear when working with the vehi-

cle.

• The machine may only be driven on

those areas which have been ap-

proved by the contractor or the per-

son appointed by him for the

deployment of this machine.

• Do not use tires for climbing on or off

- danger of slipping!

• When using the vehicle, it is essen-

tial to pay attention to third parties,

especially children.

• The vehicle is not suitable for clear-

ing up hazardous, inflammable or

explosive fluids, dust or substances.

• Remove the ignition key to prevent

unauthorized use of the vehicle.

• The condition and operational safety

of the vehicle and working equip-

ment have to be checked before

starting work. The vehicle must not

be used if it is not in a proper working

condition.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hako Citymaster 1250 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hako Citymaster 1250

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info