10
First Operation
2 First Operation
2.1 Instruction
Instruction is required before first ope-
ration. First instruction into handling of
the machine must be held by a qualified
person sent by your local Hako contract
dealer. Your Hako dealer will be infor-
med by the manufacturer upon delivery
of the vehicle and will contact you to
make a date for instruction.
2.2 Initial charging procedure
Before first operation of the
machine, fully charge the bat-
tery with an initial charging pro-
cedure and comply with the
operating instructions of the
charger as well as with those of
the battery manufacturer.
Hako cannot be held liable for
damages resulting from the
fact that the initial charging has
not or insufficiently been done.
2.3 Before Taking into Operation
Proceed to the following inspections be-
fore taking the machine into operation:
1. Check parking site for signs of leaka-
ge. Hoses, lines and tanks must be
free from any leakage or damage.
2. Install brushes and squeegee, see
maintenance chapter.
3. Install batteries and connect battery
plug, see maintenance chapter.
4. Check battery charge and proceed
to re-charging of batteries if required.
Generally proceed to initial charging
before first operation of the machine.
5. Empty soiled water tank and clean it
if required, see maintenance chap-
ter.
6. Re-fill clear water tank and add cle-
aning agent according to the manu-
facturer's recommendations.
Use only cleaning agents sui-
table for automatic machines
(low-foaming) and comply with
the instructions for use, dispo-
sal and with the warning infor-
mation specified by the cle-
aning agent's manufacturer.
2.4 Start Machine
Before start of the machine, set
accelerator level to neutral po-
sition. Should the accelerator
lever be out of neutral position
and machine be switched on,
an error message occurs.
Proceed to the following to set the ma-
chine into operating mode:
• Disconnect mains plug of the char-
ger from outlet and fasten to holder if
require.
• Switch on machine by actuation of
key switch from position (0) to positi-
on (1).
10
First Operation
2 First Operation
2.1 Instruction
Instruction is required before first ope-
ration. First instruction into handling of
the machine must be held by a qualified
person sent by your local Hako contract
dealer. Your Hako dealer will be infor-
med by the manufacturer upon delivery
of the vehicle and will contact you to
make a date for instruction.
2.2 Initial charging procedure
Before first operation of the
machine, fully charge the bat-
tery with an initial charging pro-
cedure and comply with the
operating instructions of the
charger as well as with those of
the battery manufacturer.
Hako cannot be held liable for
damages resulting from the
fact that the initial charging has
not or insufficiently been done.
2.3 Before Taking into Operation
Proceed to the following inspections be-
fore taking the machine into operation:
1. Check parking site for signs of leaka-
ge. Hoses, lines and tanks must be
free from any leakage or damage.
2. Install brushes and squeegee, see
maintenance chapter.
3. Install batteries and connect battery
plug, see maintenance chapter.
4. Check battery charge and proceed
to re-charging of batteries if required.
Generally proceed to initial charging
before first operation of the machine.
5. Empty soiled water tank and clean it
if required, see maintenance chap-
ter.
6. Re-fill clear water tank and add cle-
aning agent according to the manu-
facturer's recommendations.
Use only cleaning agents sui-
table for automatic machines
(low-foaming) and comply with
the instructions for use, dispo-
sal and with the warning infor-
mation specified by the cle-
aning agent's manufacturer.
2.4 Start Machine
Before start of the machine, set
accelerator level to neutral po-
sition. Should the accelerator
lever be out of neutral position
and machine be switched on,
an error message occurs.
Proceed to the following to set the ma-
chine into operating mode:
• Disconnect mains plug of the char-
ger from outlet and fasten to holder if
require.
• Switch on machine by actuation of
key switch from position (0) to positi-
on (1).
