683782

Hako Scrubmaster B140R Seite 13

13
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
A Key switch
turns the electrical system ON/OFF
and protects the machine against
unauthorized use; moreover it holds
the hourmeter display. With the
switch in OFF position, all control
functions are reset to the initial
state (reset).
B Horn button
actuates the electric horn.
C Pilot lamp (yellow)
for brush pressure
alights if the brush pressure pedal
(II/3) is depressed
45
D Pilot lamp (red)
for max. filling level
alights if the maximum filling level in
the soiled water tank is attained.
E Pilot lamp (red)
for parking brake
alights if the parking brake pedal
(I/4) is depressed. If the travel drive
assembly is switched on a buzzer
sound in addition.
F Pilot lamp (red)
for fault display
alights in case of one of the
following faults occurring:
– thermostat switch of the brush or
drive motor has closed
– one of the fuses is defective or
one of the electronic circuit-
breakers tripped
– other faults
Electronic circuit breakers
In addition to the fuses, the Hako-
matic B 910 is equipped with elec-
tronic circuit-breakers for the main dri-
ves. In case of overload one of the
electronic circuit breakers responds,
the fault lamp (F) alights and an error
code appears in the hourmeter
display.
The reset can only be effectuated by
turning the key switch to ”OFF”.
If the electronic circuit-breaker trips
again after re-starting, the cause has
to be detected.
G Hourmeter/service display
displays the operation hours. The
meter only counts if the consumers
e.g. drive or brush motor, suction
turbine or pre-sweeper are ON. A
red dot at the right bottom of the
display flashes simultaneously.
A Key switch
turns the electrical system ON/OFF
and protects the machine against
unauthorized use; moreover it holds
the hourmeter display. With the
switch in OFF position, all control
functions are reset to the initial
state (reset).
B Horn button
actuates the electric horn.
C Pilot lamp (yellow)
for brush pressure
alights if the brush pressure pedal
(II/3) is depressed
45
D Pilot lamp (red)
for max. filling level
alights if the maximum filling level in
the soiled water tank is attained.
E Pilot lamp (red)
for parking brake
alights if the parking brake pedal
(I/4) is depressed. If the travel drive
assembly is switched on a buzzer
sound in addition.
F Pilot lamp (red)
for fault display
alights in case of one of the
following faults occurring:
– thermostat switch of the brush or
drive motor has closed
– one of the fuses is defective or
one of the electronic circuit-
breakers tripped
– other faults
Electronic circuit breakers
In addition to the fuses, the Hako-
matic B 910 is equipped with elec-
tronic circuit-breakers for the main dri-
ves. In case of overload one of the
electronic circuit breakers responds,
the fault lamp (F) alights and an error
code appears in the hourmeter
display.
The reset can only be effectuated by
turning the key switch to ”OFF”.
If the electronic circuit-breaker trips
again after re-starting, the cause has
to be detected.
G Hourmeter/service display
displays the operation hours. The
meter only counts if the consumers
e.g. drive or brush motor, suction
turbine or pre-sweeper are ON. A
red dot at the right bottom of the
display flashes simultaneously.
A Key switch
turns the electrical system ON/OFF
and protects the machine against
unauthorized use; moreover it holds
the hourmeter display. With the
switch in OFF position, all control
functions are reset to the initial
state (reset).
B Horn button
actuates the electric horn.
C Pilot lamp (yellow)
for brush pressure
alights if the brush pressure pedal
(II/3) is depressed
45
D Pilot lamp (red)
for max. filling level
alights if the maximum filling level in
the soiled water tank is attained.
E Pilot lamp (red)
for parking brake
alights if the parking brake pedal
(I/4) is depressed. If the travel drive
assembly is switched on a buzzer
sound in addition.
F Pilot lamp (red)
for fault display
alights in case of one of the
following faults occurring:
– thermostat switch of the brush or
drive motor has closed
– one of the fuses is defective or
one of the electronic circuit-
breakers tripped
– other faults
Electronic circuit breakers
In addition to the fuses, the Hako-
matic B 910 is equipped with elec-
tronic circuit-breakers for the main dri-
ves. In case of overload one of the
electronic circuit breakers responds,
the fault lamp (F) alights and an error
code appears in the hourmeter
display.
The reset can only be effectuated by
turning the key switch to ”OFF”.
If the electronic circuit-breaker trips
again after re-starting, the cause has
to be detected.
G Hourmeter/service display
displays the operation hours. The
meter only counts if the consumers
e.g. drive or brush motor, suction
turbine or pre-sweeper are ON. A
red dot at the right bottom of the
display flashes simultaneously.
A Key switch
turns the electrical system ON/OFF
and protects the machine against
unauthorized use; moreover it holds
the hourmeter display. With the
switch in OFF position, all control
functions are reset to the initial
state (reset).
B Horn button
actuates the electric horn.
C Pilot lamp (yellow)
for brush pressure
alights if the brush pressure pedal
(II/3) is depressed
45
D Pilot lamp (red)
for max. filling level
alights if the maximum filling level in
the soiled water tank is attained.
E Pilot lamp (red)
for parking brake
alights if the parking brake pedal
(I/4) is depressed. If the travel drive
assembly is switched on a buzzer
sound in addition.
F Pilot lamp (red)
for fault display
alights in case of one of the
following faults occurring:
– thermostat switch of the brush or
drive motor has closed
– one of the fuses is defective or
one of the electronic circuit-
breakers tripped
– other faults
Electronic circuit breakers
In addition to the fuses, the Hako-
matic B 910 is equipped with elec-
tronic circuit-breakers for the main dri-
ves. In case of overload one of the
electronic circuit breakers responds,
the fault lamp (F) alights and an error
code appears in the hourmeter
display.
The reset can only be effectuated by
turning the key switch to ”OFF”.
If the electronic circuit-breaker trips
again after re-starting, the cause has
to be detected.
G Hourmeter/service display
displays the operation hours. The
meter only counts if the consumers
e.g. drive or brush motor, suction
turbine or pre-sweeper are ON. A
red dot at the right bottom of the
display flashes simultaneously.
Scrub-
master B140 R is equipped with elec-
… 13 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hako Scrubmaster B140R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info