683782
16
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
O Key for water flow raising
is used to increase the water quan-
tity supplied up to max. 5.5 liters/
minute.
P Key for brush drive, suction
turbine with pilot lamp (green)
turns the brush drive assembly
and the squeegee ON/OFF with a
simultaneous lowering/lifting of the
brush head and the squeegee. The
green pilot lamp alights if the units
are ON and lowered. In case of a
malfunction the fault lamp (F)
alights and the error code appears
in the service display.
1 Drain hose for soiled water
is used for draining the soiled
water.
Note: When work is finished, the
soiled water tank has to be drained
and rinsed.
Drainage of soiled water: Unhinge
the drain hose and open the seal.
The quantity drained-off can be
regulated by rotation of the seal,
which is completely opened, if
required, by swiveling.
Re-close the seal by rotation to the
stop, and attach the drain hose.
2 Connection for water hose
of additional scrubbing and
vacuuming tool
is used for connection of the water
hose. The vacuuming hose has to
be linked with the unit’s vacuuming
hose by means of a cylindrical
adaptation.
48
II
1 Drain hose for soiled water
2 Connection for additional scrubbing and
vacuuming tool
3 Drain hose for fresh water
1
2
3
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hako Scrubmaster B140R wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info