Bedienungsanleitung Hama 12084 - 8 in 1 (Seite 10 von 24) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

607796

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• If the code input was valid, the red LED (1)

goes out according to the input of the last

place.

• Press SHIFT (16) brieﬂy and then OK (15)

to save the code. The LED (1) brieﬂy goes

out.

• Brieﬂy press the Shift (16) key.

• An invalid code was entered, the red

LED (1) ﬂ ashes for three seconds before it

goes out. Should the device not reacts;

you repeat the programming where

appropriate with another code. Please try

out all codes indicated for your brand.

• Select the code which all available

commands of your remote control react to

correctly.

• You should not have also any success in

this way, then you attempt it with that one

„search run automatic in the chapter“

described search method.

Manual code search run

• Turn on the device manually.

• Hold the key setup (4) pressed for approx.

3 seconds until the red LED lights up

permanently.

• Press the source key (3) (TV, STB, CBL,

AUDIO, AUX, VCR, CD, DVD) shortly.

! Press the „Mode“ (2) button before using

the group of devices (AUX, AMP, DVB-T,

CBL).

• You press repeatedly the key POWER (17)

after each other (this can be up to 350

times), only at VCR (Video recorders) asks

the key P+ (14) or P- (14)

• to the device that is supposed to be

operated, off, or changes the channel or

reacts correspondingly. The code-search

is begun with the code number currently

stored on the cluster.

• Press SHIFT (16) brieﬂy and then OK (15)

to save the code. The LED (1) brieﬂy goes

out.

• Brieﬂy press the Shift (16) key.

• Due to the extensive number of different

possible codes, up to 350 possible codes

are preset per device type. In individual

cases, it may be possible that only

the most common main functions are

available. The procedure described may

be unsuccessful for some special device

models.

Automatic search run

If your device does not respond to the remote

control although you tried out all codes

performed for your device type and the

corresponding brand, you attempt it with the

automatic search run. Through that you

can ﬁ nd also such codes of such brands

which are not performed in the device code

list.

• Turn on the device manually

• Hold the key setup (4) pressed for approx.

3 seconds until the red LED (1) lights up

permanently.

• Press the source key (3) (TV, STB, CBL,

AUDIO, AUX, VCR, CD, DVD) shortly.

! Press the „Mode“ (2) button before using

the group of devices (AUX, AMP, DVB-T,

CBL).

• Focus the remote control on the device

and press the key P+ (14) once shortly.

• If the device does not have any

program-function, you press the key

POWER (17) instead of the P+ (14).

• The remote control starts the code

search after 6 seconds and sends in the

1 second’s clock pulse (see also next

section) after each other all codes. At

every sending the red LED lights up.

• As soon as the device responds to the

remote control, press SHIFT (16) and then

OK (15). Brieﬂy press the Shift (16) key. If

you do not press OK in time, press PROG-

(14) to return step-by-step to the code

where the device responded.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 12084 - 8 in 1 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info