Bedienungsanleitung Hama 12084 - 8 in 1 (Seite 11 von 24) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

607796

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

• To stop searching, press SHIFT (16) and

then EXIT (13).

• Brieﬂy press the Shift (16) key.

When the remote control instead of 1 only

every 3 seconds a new code is supposed to

send, you go on as follows.

You press within 6 seconds according

to pressures of the key P+ (14) (and/or

POWER (17)) how in before described, the

key P+ (14) or

P- (14) still once. The remote control sends

now a new code only every 3 seconds.

Through that you win more time in order to

abort the process, however, the code search

through that lasts also longer.

Code-identiﬁcation

The code identiﬁcation offers you the

possibility, already to determine entered

codes that are stored in the remote control.

So go ahead.

• Hold the key setup (4) pressed for approx.

3 seconds until the red LED (1) lights up

permanently.

• Press the source key (3) (TV, STB, CBL,

AUDIO, AUX, VCR, CD, DVD) shortly.

! Press the „Mode“ (2) button before using

the group of devices (AUX, AMP, DVB-T,

CBL).

• You press the key setup (4) shortly, the

red LED (1) goes out shortly during the

keystroke.

• In order to ﬁ nd the ﬁ rst number, you press

the numeric keys (8) from 0 to 9.

• If the red LED (1) goes out shortly, it is the

ﬁ rst

stored number.

• In order to ﬁ nd the second number, you

press in turn the numeric keys (8) from 0

to 9 until the red LED (1) goes out.

• Repeat the process for the third and the

fourth number.

• The red LED (1) goes out as soon as the

key was pressed for the fourth number.

• The code-identiﬁcation is now ﬁ nished.

Normal use

After you have carried out the programming

of your remote control for yours audio/video

device, the remote control works in the most

common primary functions as the original

remote control of the respective device.

Focus your remote control on the wanted

device and press the corresponding source

key. The red LED will light up shortly.

They activate the functions now through

pressing of the corresponding function key of

your universal remote control.

At every keystroke the red LED lights up

shortly.

Possibly every function of your original

remote control is not directly available on the

universal remote control.

In particular near newer devices it is possible

that the functions are ﬁ rst of all put aside or

not at all available among other keys than

expected.

With the AV Taste you choose usually the

AV input of the TV set for e.g. the STB

receiver or the video recorder.

Special functions

„electronic program“

The key EPG (12) corresponds to the function

„Electronic Program Guide“ and has different

functions, depending on which device this

is used.

At STB - or VCR - codes keep you up the key

a programming carry out, provided that

your video recorder about a SHOWVIEW

- function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama 12084 - 8 in 1 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info