607480
16
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
30 31
3. Then:
- The LCD displays standby status. (LCD version)
- The power indicator lights and the power is on. (LED Indicator version)
NOTE:
For the rst time usage, turn on both units, they can automatically scan the
corresponding code at once without press any key. If reset the corresponding code for
both units, user has to press the LINK key.
B. Baby unit emission:
1. Place Baby unit in room where you intend to use it.
2. Push the SENSITIVITY switch to a desired position to turn on the Baby unit
transmission.
3. As soon as the Baby unit transmits a signal, then:
LCD Version LED Indicator version
Constantly changing display-
readouts
4. The transmitter is standby status when no signal is transmitted.
LCD Version LED Indicator version
C. Parents unit reception
1. Place Parents unit in room where you intend to use it.
2. Slide the VOLUME switch to a desired position and the unit is ready for reception.
3. If the unit receives a signal,
LCD Version LED Indicator version
Constantly changing display-
readouts
4. The receiver is standby status when no signal is received.
LCD Version LED Indicator version
When you experience interference (buzzing or static, etc.), reset both units to another
corresponding code. ( details please refer to P. 11 scan the
corresponding code for the units )
IMPORTANT! Test sound reception before use and whenever location of Baby unit is
changed. (Refer to Testing Before First Time Usage)
Note:
Position the Baby unit at least 1 meter away from the baby so that the microphone can
pick up the child‘s sound.
Unwrap and fully extend power cord for best transmission if adaptor is used.
Plug the adaptor into the nearest standard household electrical outlet.
Operations Procedures
A. Power On / Off
1. Connect the Parents unit with the AC adaptor. Plug it into the nearby standard
electrical outlet or insert 3 AAA alkaline batteries.
2. Turn on at the right side upward of the unit, a click sound to
be heard indicates the unit is turned on.
3. Turn downward, a click sound indicates the unit is off.
green light
ashing green light
green light
green light
ashing green light
16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hama BC400D - 92661 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info