607480
18
Zoom out
Zoom in
Vorherige Seite
1/75
Nächste Seite
34 35
Baby Unit
For Blue Angel version, when only turn on the Parents unit, out of range alert sound
should be heard within 30 second.
Note: Under out of range alert mode, the TALK, PAGE and music play key is not available
for use.
I. Key Lock / Unlock
1. Turn the right-hand key lock side switch to LOCK position
of unit to lock key. The TALK key, PAGE key and MUSIC
key are not available for use.
2. Turn the same switch to UNLOCK position to unlock all the keys.
J. Belt Clip
The Baby unit and Parents unit can both be carried around using the belt clip provided
on the rear of each unit.
How to operate 2 way communication between Parents unit and Baby unit
The Baby Phone yields high privacy and almost zero-interference to end users. There
are more than 65000 ID code for user selection with the LINK key
positioned at the bottom of the units.
NOTE:
Only scan the corresponding code for both units, they are able to connect to one
another.
Operating and Setup
A. Scan the Corresponding Code
1. Turn on both units. The Baby unit will emit a random ID code to Parents unit
automatically without pressing any key.
2. Once scanned the corresponding code, the units are ready for use. The code is
recorded even thought you turn off the units or recharge the batteries. Or else the
unit is not for use.
B. LINK key
LINK key is located at the bottom of the Parents unit and Baby unit. It is used for
eliminating the corresponding code recorded in the unit and reset a new
corresponding code for the Parents unit and Baby unit. The Parents unit / Baby unit
can connect with another Baby unit / Parents unit with the LINK key to scan a new
corresponding code for them.
1. Ensure both units are turned ON. Press the LINK key of the units with a spiky and
thin object (such as toothpick).
2. Both units begin to scan corresponding code.
LCD Version LED Indicator version
Scanning the correspon-
ding code automatically
Parent unit: Parent unit:
Baby unit: Baby unit:
Scanned the correspondi-
ng code successfully
Baby unit and parent unit:
normal status
or
constantly changing
display-readouts
with a “Di” sound
Baby unit
Parent unit
with a “Di” sound
ashing
ashing
red light
ashing
orange light
ashing
orange light
ashing
ashing
red light
green light
18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hama BC400D - 92661 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info