Bedienungsanleitung Hama CDR70BT (Seite 13 von 19) (Englisch)

723748

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Initial setup

Note

• Make sure that the antenna has been properly

connected.

• When you switch on for the rst time, the device is

in DAB/DAB+ mode and begins immediately with the

station search.

• Press [

] (6) if you would like to start the search

manually at a later time.

5. General notes on use

Note

• Only operate the product in ambient temperatures

between -10°C and 50°C.

• Only store the product in ambient temperatures

between -20°C and 60°C.

5.1 Navigation and controls

[VOLUME/SELECT/NAVIGATE] (5) has two different

functions:

• Turn [VOLUME/SELECT/NAVIGATE] to select among

menu items.

• Conrm the selection by pressing [VOLUME/SELECT/

NAVIGATE].

• Press [

] to return to the previous menu level.

5.2 Additional information / system settings

Briey press [ ] (4) to display context-dependent

additional information. The information shown depends on

the operating mode as well as the current station.

Possible information

• Description

• Indicates the radio station, the current program,

contents, subjects, etc.

• Genre

• Reliability/signal strength

• Bit rate

• The current digital bit rate of the station currently being

received.

• Station information

• Current time

• Today’s date

• Current frequency of the FM transmitter

5.3 Language setting

At initial startup, the language of the radio defaults to

English. To change the language, please proceed as

follows:

• Press and hold [

] (4) for about 3 seconds to access

the settings menu.

• Turn [VOLUME/SELECT/NAVIGATE] to navigate to the

‘System’ menu item.

• Conrm the selection by pressing [VOLUME/SELECT/

NAVIGATE].

• Turn [VOLUME/SELECT/NAVIGATE] to get to the

‘Language’ menu item. Conrm the selection by pressing

[VOLUME/SELECT/NAVIGATE].

• Turn [VOLUME/SELECT/NAVIGATE] to select your

desired system language.

• Conrm the selection by pressing [VOLUME/SELECT/

NAVIGATE].

5.4 Connection to the vehicle radio (FM transmitter

/ wired connection)

5.4.1 FM transmitter

The device has an integrated transmission unit (FM

transmitter), which transmits a FM frequency into the

immediate environment. This frequency can be received by

nearby radios with FM reception.

When the device is started up for the rst time, the FM

transmitter is set to a standard frequency of 86.0 MHz and

is immediately active.

Note

• Check correct functioning of the FM transmitter by

making sure that the device receives a radio station

via DAB/DAB+.

Changing frequency

Note

• Make sure that both the device and the radio receive

the same frequency.

• Press and hold [ ] (4) for about 3 seconds to access

the settings menu.

• Turn [VOLUME/SELECT/NAVIGATE] to navigate to the

‘FM Transmitter’ menu item.

• Turn [VOLUME/SELECT/NAVIGATE] to change the

frequency of the FM transmitter. Conrm the selection by

pressing [VOLUME/SELECT/NAVIGATE].

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama CDR70BT Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama CDR70BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info