723745
26
Zoom out
Zoom in
Vorherige Seite
1/33
Nächste Seite
21
To set the equaliser, proceed as follows:
[ ]
System settings
Equaliser
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select
one of the pre-congured proles.
To create your own equaliser prole, choose the My EQ
settingoption.
This takes you to the bass, treble and loudness
settings (volume amplication).
To change a value, press [POWER/VOLUME/ENTER/
NAVIGATE] (9) on the relevant selection and change
the values by turning [POWER/VOLUME/ENTER/
NAVIGATE] (9) left or right. If playback is already
started when you modify these settings, you can hear the
changes in the audio immediately.
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9) again.
Once you have made all the settings, press [
] (4) on
the tuner and conrm that the settings are to be saved
by pressing [POWER/VOLUME/ENTER/NAVIGATE] (9).
To use the new prole, choose the My EQ option.
16.2 Internet settings
16.2.1 Network wizard – Configuration of Internet
connection / Search
The network wizard helps you set up a connection
between the tuner and the Internet. More methods of
conguration and detailed information are amplied
subsequently.
You can start the Network wizard as follows:
Press [
] (1) to go to the system settings.
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Internet settings" menu item.
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Network wizard" menu item.
When the wizard is started, the tuner searches for WLAN
(WiFi) connections and then shows a list of the available
networks.
Turn [POWER/VOLUME/ENTER/NAVIGATE] (9) to
switch between the networks found. At the bottom of
the list are options to restart the search ("[Rescan]") or
congure the connection yourself ("[Manual cong]").
If your network is not found or the SSID (Service Set
Identication, that is, the name of your network) is not
shown, the network may be hidden or out of range. In
this case, try manual conguration.
16.2.2 Wireless network connection (WLAN)
Depending on the network, there are a number of ways to
connect to it.
Networks that support connection via WPS (Wi-Fi Protected
Setup) are identied in the list with the prex "[WPS...]".
Other connections are either open networks or connections
protected with a PSK, or Pre-Shared-Key.
WPS / PSK / open network connection
WPS allows simple and nevertheless protected connection
of the tuner to the network. Two options are available for
this purpose:
The connection can be set up by means of PBC, or Push-
Button Conguration, or by the PIN procedure, in which
the web interface of your router prompts you to enter a
randomly generated
sequence of numbers.
PBC setup
Select your desired network. (Indicated by the prex
"[WPS...]")
In the WPS menu, then select the "Push Button"
option and conrm the selection by pressing [POWER/
VOLUME/ENTER/NAVIGATE] (9).
Press the WPS button on your router or current access
point. This can often be done using the web interface,
as well.
Consult the operating instructions of your router or
access point for details.
Once the procedure has also been initiated on the router
/ AP, the tuner should connect with the access and the
network connection should be available.
Alternatively, PBC setup can be initiated from the tuner's
Internet settings:
Press [
] (1) to go to the system settings.
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "Internet settings" menu item.
Conrm the selection by pressing [POWER/VOLUME/
ENTER/NAVIGATE] (9).
Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to
navigate to the "PBC Wlan setup" menu item.
26

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Hama DIT1010BT wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Hama DIT1010BT

Hama DIT1010BT Bedienungsanleitung - Deutsch - 33 seiten

Hama DIT1010BT Bedienungsanleitung - Holländisch - 33 seiten

Hama DIT1010BT Bedienungsanleitung - Französisch - 33 seiten

Hama DIT1010BT Kurzanleitung - Alle Sprachen - 102 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info