Bedienungsanleitung Hama DIT1010BT (Seite 27 von 33) (Englisch)

723745

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

PIN setup

• Select your desired network. (Indicated by the prex

"[WPS...]")

• In the WPS menu, choose the PIN option and conrm

your selection by pressing [POWER/VOLUME/ENTER/

NAVIGATE] (9).

• The tuner generates an 8-digit code, which must be

entered into the web or user interface of your router or

access point.

• Consult the corresponding handbook for details on

conguring the router or access point.

Skip WPS / Pre-Shared Key (PSK) conguration

• Choose the item "[Skip WPS]" to proceed to key entry.

• On networks that do not support WPS, you will go

directly to key entry.

• In the input screen, enter the whole key and then conrm

with the OK button.

• If the key was entered correctly, the tuner connects to

the access point and establishes the Internet/network

connection.

Note

• Often the Pre-Shared Key is printed on the back of the

router or access point.

• When entering the key, take notice of capitalisation.

Open network / unsecured network

Note

•

ecommend against establishing unsecur

connections and advise you to always protect your

network against unauthorised access.

• If you plan to use an open network, you just have to

select the network from the list of available networks

and conrm. The tuner then connects immediately

with the access point.

16.2.3 Manual configuration of network connection

– wireless (WLAN)

• To manually congure a network connection, proceed as

follows:

• Press [

] (1) to go to the system settings.

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to

navigate to the "Internet settings" menu item.

• Conrm the selection by pressing [POWER/VOLUME/

ENTER/NAVIGATE] (9).

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to

navigate to the "Manual settings" menu item.

Manual conguration wireless (WLAN) – DHCP

enable

• Select the option "Wireless".

• Selection the option "DHCP enable".

• In the input screen, enter the whole SSID (network name)

and then conrm with the OK button.

• Now choose the security standard used by the network.

This can be found in the conguration options of your

router or access point.

• Depending on the encryption used, you may need

to enter the network key before the connection is

established.

Manual conguration wireless (WLAN) – DHCP

disable

This method corresponds to conguration with an active

DHCP server (manual conguration wireless (WLAN)

- DHCP enabled), however you must also enter the

network information such as the IP address, subnet mask,

gateway address and DNS (primary and secondary).

Find this information in the web interface of your router

or access point, or if this information is already correctly

entered, you can conrm the entry. The tuner now attempts

to establish the connection.

16.2.4 View settings

This is where you will nd all of the key information about

all network connections that the tuner is currently using, or

which have been set up, e.g.: MAC address, WLAN region,

DHCP enable / disable, SSID, IP address, subnet mask,

gateway address, DNS (primary/secondary), etc.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama DIT1010BT Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama DIT1010BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info