Bedienungsanleitung Hama DIT1010BT (Seite 29 von 33) (Englisch)

723745

Zoom out

Zoom in

Vorherige Seite

1/33

Nächste Seite

16.4 Language

The rst time it is used, the tuner's default language is

English. To change tuner's menu language, proceed as

follows:

• Press [

] (1) to access the Settings menu.

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to

navigate to the "Settings" menu item.

• Conrm the selection by pressing [POWER/VOLUME/

ENTER/NAVIGATE] (9).

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to navigate

to the "Language" menu item. Conrm the selection by

pressing [POWER/VOLUME/ENTER/NAVIGATE] (9).

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to select

your preferred system language.

• The language setting currently selected is marked with

an asterisk (*).

Note

• The following languages are available: English,

German, Danish, Dutch, Finnish, French, Italian,

Norwegian, Polish, Portuguese, Spanish, Swedish,

Turkish

16.5 Factory reset

To reset the tuner to the factory default settings (delivery

condition), proceed as follows:

• Press [

] (1) to go to the system settings.

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to

navigate to the "Factory settings" menu item.

• Conrm the following prompt with YES to reset the

tuner to the factory default settings. All settings made

previously are deleted.

• To abort the deletion process, press [

] (4) or select NO.

Note

Resetting to the factory default settings can remedy some

problems and malfunctions.

• However, all settings made previously, such as equaliser

and favourites, permanently deleted.

16.6 Software update

Improvements and new features are always constantly

being developed for the software used in our tuners to

resolve potential errors, increase the range of functions,

and so on. We recommend that you always install any

available updates on your tuner.

Proceed as follows:

• Press [

] (1) to go to the system settings.

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to

navigate to the "Software update" menu item.

• If you select Automatic updates (YES), the tuner will

automatically check for new software updates on a

regular basis. (Recommendation)

• Choose Check now to manually start a check for

software updates.

Warning

• Make sure that the device has a stable power supply

before you start a software update.

• Power supply failure during a software update can

cause irreparable damage to the tuner.

Update port

The update port allows you to load software updates

manually. The procedure for automatically updating the

software can be found under 16.6 Software update.

Note

• Available updates and instructions on how to install

them can be found at: www.hama.com -> 00054895

16.7 Info

To check the current software version, radio ID and device

designation of your tuner, proceed as follows:

• Press [ ] (1) to go to the system settings.

• Use [POWER/VOLUME/ENTER/NAVIGATE] (9) to

navigate to the "Info" menu item.

• Conrm the selection by pressing [POWER/VOLUME/

ENTER/NAVIGATE] (9).

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Hama DIT1010BT Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Hama DIT1010BT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info