Bedienungsanleitung HammerSmith M22606 Multitool (Seite 17 von 64) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

813561

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Note: The oscillating attachment is suitable for

cutting wood or plasterboard but not for cutting

stone or concrete walls.

1. Select the desired angle for the application.

2. Position the holes of the oscillating accessory

over the ﬁxing pins of the mounting plate.

3. Make sure that the accessory lies ﬂat on the

surface of the mounting plate.

4. Place the washer in the inner opening of the

oscillation accessory.

Note: Make sure that the ﬂat side of the washer

that holds the oscillating accessory faces the

accessory.

5. Insert the fastening screw through the washer

into the rotary spindle of the oscillating

attachment.

6. Use the Allen key to tighten the fastening screw

by turning it clockwise. Do not overtighten

A. Sanding

The Delta sanding plate is ﬁtted with Velcro fabric

for quick attachment of the sanding sheets.

Clean the sanding plate before attaching the

sanding sheet.

1. Attaching the sanding sheet: Press the sanding

sheet evenly onto the sanding plate. Make sure

that the punched holes in the sanding sheet

match up with the holes in the sanding plate.

2. Removing the sanding sheet: Simply pull the

sanding sheet oﬀ the sanding plate.

Note: Always wear suitable clothing and

protective equipment when working with the

device. Ensure that the device works correctly

before every use. Personal protective

equipment and a correctly functioning device

reduce the risk of injuries and accidents.

After switching on, move the device so that it

comes into contact with the workpiece. In order to

achieve optimal sanding results, only ever work

with sanding sheets that are in perfect condition.

Apply light and even pressure while working. This

protects the device and sanding sheet. Do not use

the same sanding sheet to sand diﬀerent materials

(e.g. metal and then wood).

Selection of the sanding sheet

(95 mm x 95 mm x 95 mm)

P60 for rough sanding

P120 for ﬁnishing

P240 for ﬁne sanding

B. Sawing with the oscillating saw blade

Always wear eye protection. Use only undamaged

saw blades that are in full working order. Make sure

that you have a secure footing and hold the device

ﬁrmly with both hands at a suﬃcient distance from

your body. Before you saw the workpiece, ﬁrst check

that no foreign objects such as nails and screws are

present. These must be removed before starting

work. It is only intended for cutting soft materials,

such as wood or plasterboard.

THE OSCILLATING SAW IS NOT SUITABLE FOR

CUTTING INTO STONE OR CONCRETE WALLS.

C. Scraping with the oscillating scraper

Old carpet adhesive and wallpaper residues can be

removed smoothly with the help of the oscillating

scraper. Always work at the correct angle, so as not

to damage the carrier material.

This symbol means that such electrical

equipment or batteries must not be

disposed of with normal household

waste. You are legally obliged to hand in such items -

free of charge - to a public collection point or distributor-

created collection point for the recycling of electrical

devices and expired bulbs and batteries within the scope

of the Electrical and Electronic Equipment Act that are

not encapsulated by or ﬁxed into the appliance, and can

be removed or separated from the appliance non-

destructively, for disposal at the end of their service life.

Use rechargeable batteries instead of single-use

batteries wherever possible. The recovery and recycling

of old appliances makes an important contribution to

protecting our environment. Improper disposal can

result in toxic substances being released into the

environment, which can have harmful eﬀects upon

people, animals and plants. Batteries with an increased

pollutant content are also marked with the following

symbols: Cd = cadmium, Hg = mercury, Pb = lead.

Consumers are themselves responsible for deleting any

personal data from appliances.

This product complies with the European

directives.

Protection rating II

SPECIFICATIONS:

The product must be stored in a dry place and must

not be exposed to direct sunlight during transport.

Operating temperatures and humidity: 10 - 35°C ≤

65% relative humidity

Temperature and humidity for storing the tool:

M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 17M22606_HammersmithMultitool_Manual_V03_20220629_MM.indd 17 20.07.22 12:2120.07.22 12:21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

HammerSmith M22606 Multitool Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info