2. Ensure that the devices are within 10m (30ft) of each other.
3. Tap Start > Settings > Bluetooth.
4. Tap New Device. The NAUTIZ X3 will search for Bluetooth devices within range.
5. Enter the name of the headset and tap Next. A password prompt will be displayed.
6. Enter the password for the headset.
7. Tap Next The NAUTIZ X3 will connect to the headset. For detailed instructions
about the communications with Bluetooth devices, please refer to the user manual for
the headset.
Note: While an active pairing is being established, the NAUTIZ X3 will not go into
pause mode even when the power button is pressed. A notification message will appear
instead. The power button can be used again when the WAN connection has been
disconnected (if using a hands-free profile).
Serial Port Services
Wireless Bluetooth uses a serial port connection as well as the wired serial cable
connection. It is used for configuring applications that will be used for connections
with the relevant serial ports.
How to connect to serial ports
1. Activate Bluetooth on both devices and turn on detection mode.
2. Ensure that the devices are within 10m (30ft) of each other.
3. Go to Start > Settings > Bluetooth > Device.
4. Tap Add New Device. The NAUTIZ X3 will search for Bluetooth devices within
range.
5. Choose a device from the list.
6. Tap Next A password prompt will be displayed.
Note: If smart synchronisation is pre-configured or a pre-defined PIN is requested, the
password prompt will not be displayed.
7. Enter password and tap Next. The device will then be added to the Bluetooth Device
List.
8. Select a serial device from the list of devices. The Connection settings screen will be
displayed.
9. Select the serial port confirmation column.
10. Tap Save.
11. Tap the COM ports tab.
