SYSTEM CONFIGURATION
SYSTEM CONFIGURATION 19
¶,
as doing so may damage your speakers the
A When 7.1-channel infor
received, for example through the
6/8-Channel
Direct Inputs
f, or when deriving 7-Channel Stereo
or Logic 7/7.1 surround infor
mation, the A
combines the left and right surround back channel
information and outputs it as a single surround back
channel.
When you have completed your selection for the back
surround channels press the
¤
Button n on the
re
SUBWOOFER.
Press the
‹
/
›
Buttons oon the remote to select
the option that best describes your system.
The choices available for the subwoofer position will
depend on the settings for the other speakers particu-
larly the front left/right positions
If the front left/right speakers are set to
SMALL,
the subwoofer will automatically be set to
SUB,
which is the position.
If the front left/right speakers are set to
LARGE,
three options are available:
• If no subwoofer is connected to the 135,
press the
‹
/
›
Buttons o on the remote so
that
NONE appears in the on-screen menu.
When this option is selected, all bass information
will be routed to the front left/right speakers
• If a subwoofer is connected and you wish to have
the front left/right speakers reproduce bass
frequencies at all times
, and have the subwoofer
operate only when the
A
VR 135 is being used
with a digital source that contains a dedicated
Low-Frequency Effects or LFE, soundtrack. Press
the
‹
/
›
Buttons o on the remote so that
LFE appears in the on-screen menu.
• If a subwoofer is connected and you wish to use it
for bass reproduction in conjunction with the main
front left/right speakers regardless of the type of
program source or Surround mode press the
‹
/
›
Buttons o on the remote so that SUB
LFE+L/R
appears in the on-screen menu.
When this option is selected, a full-range signal
will be sent to the front left/right speakers
and the subwoofer will receive the bass frequen-
cies under frequency selected,
as described
below as well as the LFE information.
When all initial speaker settings have been
made
, you now have the option to take advantage of
the which allows
individual crossover settings to be made for each
speaker grouping
.
The low-frequency crossover point
is set by the design of your speakers Depending on
the design and driver complement of your speakers
it is usually defined as the lowest possible frequency
the speaker is capable of reproducing Before making
any changes to the settings for the crossover point,
we suggest that you find the crossover point for the
speakers in each of the three groupings front
left/right, center and surrounds by looking at the
specifications page of each speake
or by contacting your dealer
or the manufacturer’s
customer service department or W Y
need this figure to accurately configure the next group
of settings
The factor
y default setting for all speaker positions is
100Hz. If that setting is acceptable for all channels
then no adjustments are needed and you may skip
this section.
However should you wish to change one
of the settings please proceed by pressing the
⁄
Button n so that the cursor moves back up to the
top of the list of setting options Press the
⁄
/
¤
Buttons n so that X-OVER is highlighted and
the menu data will change to the screen shown in
Figure 6.
Figure 6
T
groups
,
press the
⁄
/
¤
Buttons n until the cursor
is next to the line where you wish to make a change
and then press the
‹
/
›
Buttons o until the
desired setting appears The available choices at which
point low-frequency infor
mation will be sent to the
subwoofer
, rather than to the main speaker channel,
are 40Hz, 60Hz, 80Hz, 100Hz, 120Hz and 200Hz.
Pick the choice that is identical to the information for
the speakers or if an exact match is not possible
the closest choice that is
ABOVE the speaker’s low-
frequency limit or crossover point to avoid the creation
of a low-frequency where your system will have
no bass information.
In cases where
LARGE has been selected as the
front-channel speaker option and
LFE+L/R has
been selected as the subwoofer option, the front-
channel sound infor
mation below the setting shown
will be sent to BOTH the front-channel speakers and
the subwoofer
.
Note also
LARGE-
LFE+L/R
setting has been selected, the
crossover point is set by making adjustments at the
SUBWOOFER line but the setting for the front
left/right speakers will automatically change in tandem
so that the same setting appears for both speaker
positions This ensures that there is no in the
sound field due to different crossover points at the
front and subwoofer speakers
.
When all crossover settings have been made or in
those cases where none are needed,
press the
¤
Button n so that the cursor is next to the BASS
MGR
line to make the final setting on this menu.
This setting allows you to use the same speaker size
configuration for all inputs
, or to have different settings
for each input. In most cases the factory default set-
ting of
GLOBAL will be appropriate as most lis-
teners do not need to have individualized settings
However some listeners particularly those with full-
range front speakers that are used for both movies
and music may prefer that different bass management
be used when listening to music through a CD player
as opposed to a movie from a DVD player VCR or
cable/satellite set-top
If you wish to customize the speaker settings for
each input, make certain that the
MODE line of
the
SPEAKER SETUP menu is set to
SIZE, and that the cursor is on the BASS
MGR
line and press the
‹
/
›
Buttons o so that
INDEPENDENT appears When this setting is
entered by exiting the menu, you may need to go
back to the
INPUT menu to select another input,
and then return to this menu page again to change
the settings for that input. Repeat the procedure for
any input where you wish to have a different set of
speaker configurations
NOTE: When the INDEPENDENT setting is
activated,
you may assign different speaker size set
-
tings to each input to accommodate different bass
management settings that match your preferences
with the type of program material normally used with a
particular source (for example
,
when movies are played
from DVD and music from a CD player). However the
actual speaker crossover settings are set only once and
do not change with the input selection.
The reason is
that, while bass management preferences may vary
the actual speakers remain the same
,
regardless of the
bass-management and redirection settings
When all speaker selections have been made
,
press
the
¤
Button n and then the Set Button p to
return to the
MASTER MENU.
Delay Settings
Due to the different distances between the listening
position for the front channel speakers and the sur-
round speakers the amount of time it takes for sound
to reach your ears from the front versus surround
speakers differs
.
Y
* SPEAKER SETUP *
MODE :X-OVER
LEFT/RIGHT:100HZ
CENTER :100HZ
SURROUND :100HZ
SURR BACK :-----
SUBWOOFER :-----
BASS MGR :GLOBAL
BACK TO MASTER MENU
AVR 135 OM 12/3/04 12:11 PM Page 19
