8522

Harman Kardon AVR 135 Seite 17

17
Zoom out
Zoom in
Vorherige Seite
1/48
Nächste Seite
SYSTEM CONFIGURATION 17
SYSTEM CONFIGURATION
SYSTEM CONFIGURATION 17
SYSTEM CONFIGURATION
The following few paragraphs detail the instructions for
surround mode categories with several mode options
or with other available settings.
On the
DOLBY menu (Figure 4), mode choices
include Dolby Digital, Dolby Pro Logic II-Music, Dolby
Pro Logic II-Movie, Dolby Pro Logic and Dolby 3
Stereo. The Dolby Digital EX mode is only available
when the system is set for 6.1/7.1 operation by con
-
figuring the Surround Back speakers to “Small” or
“Large” as described on page 18. When a disc is
playing that contains a special “flag” signal in the digital
audio data stream, the EX mode will be selected auto-
matically. It may also be selected using this menu or
through the front panel or remote control as shown on
page 23. A complete explanation of these modes is
found on page 24.
When the Dolby Digital mode is selected, there are
additional settings available for the Night mode.
Figure 4
The Night mode is a feature of Dolby Digital that uses
special processing to preserve the dynamic range and
full intelligibility of a movie soundtrack while reducing
the peak level. This prevents abruptly loud transitions
from disturbing others, without reducing the sonic
impact of a digital source
.
The Night mode is only
available when specially encoded Dolby Digital signals
are played.
T
o adjust the Night mode setting, make certain that the
›
cursor is on the NIGHT line of the DOLBY
menu.
Next,
press
‹
/
›
Na
viga
tion Buttons
o to
choose between the following settings, as they appear
in the on-screen display:
OFF: When OFF appears, the Night mode will not
function.
MID:
When
MID appears
,
a mild compression will
be applied.
MAX: When MAX appears, a more severe com-
pression algorithm will be applied.
We recommend that you select the
MID setting as
a starting point and change to the
MAX setting later
,
if desired.
The Night mode may also be adjusted directly any
time a Dolby Digital source is playing by pressing the
Night Mode Button l. When the button is
pressed,
D-
RANGE
will appear in the lower third
of the video screen and in the
Lo
wer Display Line
¯. Press the
⁄
/
¤
Navigation Buttons n with-
in three seconds to select the desired setting.
When you have completed your selections on the
DOLBY menu, press the
⁄
/
¤
Navigation
Buttons
n until the
›
cursor is next to the
BACK TO SURR SELECT line. Press the
Set Button p to retur
n to the
SURR
SELECT
menu (Figure 3).
On the
DTS menu, the choices made with the
‹
/
›
Buttons o on the remote are determined by a
combination of the type of program material in use
and whether the 5.1- or 6.1/7.1-channel configura-
tion is in use.
When a DTS source is playing, the choice of modes
for 7.1 systems will vary according to the type of pro-
gram source (DTS 5.1, DTS-ES Matrix or DTS-ES
Discrete). Press the
‹
/
›
Buttons o to scroll
through the choices that are available for your system
and the program in use. The DTS Neo:6 Music mode
is available with analog stereo sources and the DTS
Neo:6 Cinema mode is available with analog matrix
surround-encoded sources to deliver an enhanced
5.1-channel sound field.
When the 5.1 configuration is in use, the AVR will
automatically select the 5.1 version of DTS processing
when a DTS data stream is selected. When the
6.1/7.1 mode is selected, the DTS-ES Discrete mode
will automatically be activated when a DTS source with
the ES Discrete
“flag”
is in use
.
When a non-ES DTS
disc is in use, you may select the DTS-ES Matrix
mode through this menu to create a full eight-channel
surround mode. See page 24 for a complete explana-
tion of the DTS modes
.
On the
LOGIC 7
menu, the choices
made with
the
‹
/
›
Buttons o on the remote are determined
by whether the 5.1- or 6.1/7.1-channel configuration
is in use. In either case, the selection of a Logic 7
mode enables Har
man Kardon’
s exclusive Logic 7
processing to create fully enveloping, multichannel
surround sound from either two-channel Stereo or
Matrix-encoded programming such as
VHS cassettes
,
laser discs or television broadcasts produced with
Dolby surround.
In the 5.1 configuration, you may select the Logic 7/
5.1 Music, Cinema or Enhance mode. They work best
with two-channel music
, surround-encoded programs
or standard two-channel programming of any type
,
respectively. For 6.1/7.1 configurations, the Music and
Cinema modes may be selected. The Logic 7 modes
are not available when either Dolby Digital or DTS
digital soundtracks are in use. See page 24 for a
complete explanation of the Logic 7 modes.
On the
DSP (SURR) menu, the choices made
with the
‹
/
›
Buttons o on the remote select from
one of the DSP surround modes that are designed for
use with two-channel stereo programs to create a
variety of sound field presentations
. The choices avail-
able are Hall 1, Hall 2, Theater, VMAx Near and VMAx
Far. The Hall and Theater modes are designed for
multichannel installations, while the two VMAx modes
are optimized for use in delivering a full surround field
when only the front left and front right speakers are
installed. See page 24 for a complete explanation of
the DSP surround modes.
On the
STEREO menu, the choices made with the
‹
/
›
Buttons o on the remote may either turn the
surround processing off for a traditional two-channel
stereo presentation, or select
5 STEREO or 7
STEREO
depending on whether a 5.1 or 6.1/7.1
configuration is in use. The latter modes feed a two-
channel presentation to all speakers, regardless of
the number of speakers in use. See page 24 for a
complete explanation of the 5 Stereo and 7 Stereo
modes.
After the selections are made on the Dolby, DTS,
Logic 7, DSP (Surround) or Stereo menus, press the
⁄
/
¤
Buttons n so that the cursor moves to the
BACK TO MASTER MENU line and press
the
Set Button p.
Speaker Setup
This menu tells the AVR 135 which type of speakers
are in use
. This is important as it adjusts the settings
that decide whether your system will use the
“5-chan
-
nel” or “6-channel/7-channel” modes, as well as
determining which speakers receive low-frequency
(bass) infor
mation.
For each of these settings, use the
LARGE setting
if the speakers for a particular position are traditional
full-range loudspeakers. Use the
SMALL setting for
smaller, frequency-limited satellite speakers that do not
reproduce sounds below 200Hz. Note that when
“small” speakers are used, a subwoofer is required to
reproduce low-frequency sounds. Remember that the
“large”
and
“small”
descriptions do not refer to the
actual physical size of the speakers, but to their ability
to reproduce low-frequency
sounds. If you are in
doubt as to which categor
y
describes your speakers
,
consult the specifications in the speakers’ owner’s
manual, or ask your dealer.
* DOLBY SURROUND *
MODE: DOLBY 
DIGITAL
NIGHT: OFF 
BACK TO SURR SELECT
AVR 135 OM 12/3/04 12:11 PM Page 17
… 17 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

harman-kardon-avr-135

Suche zurücksetzen

  • Ich brauche die Anleitung für Harmann Kardon AVR 135 in deutscher Sprache. Wo kann ich sie bekommen? Eingereicht am 13-12-2022 09:01

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Harman Kardon AVR 135 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Harman Kardon AVR 135

Harman Kardon AVR 135 Bedienungsanleitung - Holländisch - 42 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info