Bedienungsanleitung Harman Kardon AVR 1510 (Seite 25 von 47) (Englisch)

534559

Zoom out

Zoom in

Vorherige Seite

1/47

Nächste Seite

ENGLISH

AVR

Listening to FM and AM Radio

Select the Radio source. A screen similar to the one in the illustration below will appear.

Use the Up/Down buttons or the Remote’s Channel buttons to tune a station as displayed

on the front panel and on-screen display.

The AVR defaults to automatic tuning, meaning each press of the Up/Down buttons scans

up or down the frequency band until a station with acceptable signal strength is found.

To switch to manual tuning, in which each press of the Up/Down buttons steps through

a single tuning frequency increment, press the Tuning Mode button on the front panel.

Each press of the button toggles between automatic and manual tuning modes. You can

also switch between automatic and manual tuning modes by pressing the OK button on

the remote control for 3 seconds.

Once you have tuned an FM station, toggling the mode setting also switches the radio

between stereo and monaural reception. (Mono reception may improve reception of

weaker stations.)

Preset Stations

You can store a total of 30 stations (AM and FM combined) as presets. When you want to

save the currently tuned station as a preset, press the remote’s Memory button. Use the

Number buttons to enter the desired preset number.

There are three ways to tune to a preset station:

Press the Left/Right buttons.Ř

Press the remote’s Preset Scan button. The AVR will tune to each preset station Ř

in order for ﬁve seconds. When the desired preset is tuned, press the Preset Scan

button again.

Enter the preset number using the Number buttons. For presets 10 through 30, press Ř

0 before the preset number. For example, to enter preset 21, press 0-2-1.

Auto Store is an alternate method for storing presets automatically. When you select Auto

Store, your AVR will scan for any frequencies with good signal and save them as presets

automatically. To use Auto Store:

In either FM or AM source, press the Info/Option button on the AVR’s remote Ř

control.

Press OK to select “Auto Store.”Ř

Highlight “Yes” and press “OK.”Ř

Your AVR may take several minutes to complete the Auto Store process. Note that

performing Auto Store will erase all currently saved preset station.

Listening to Media on a USB Device

Your AVR is compatible with MP3 and WMA media.

MP3 compatibility: Mono or stereo, contstant bit rates (CBR) from 8kbps to 320kbps,

variable bit rates (VBR) from lowest to highest quality, with sample rates from 8kHz –

48kHz.

WMA compatibility: Ver. 9.2, stereo CBR with 32kHz – 48kHz sampling rate and 40kbps

– 192kbps bit rate, mono CBR with 8kHz – 16kHz sampling rate and 5kbps – 16kbps

bit rate, VBR Pass Encoding and Quality Encoding 10 – 98, 44kHz and 48kHz sampling

rate.

No other types of media are supported.

Playing files on a USB device

1. Insert the USB drive into the AVR’s front-panel USB port.

IMPORTANT: Do not connect a personal computer or peripheral to the USB port. USB

hubs and multi-card readers are not supported.

2. Press the USB source selector button on the remote until the front-panel display’s

“USB” as the source. The USB screen will appear.

3. Select a folder and press the OK button. The AVR will list all compatible audio ﬁles.

4. Select a ﬁle to begin playback. The USB play screen will appear. Any ID3 information

will be displayed, along with the track’s elapsed/current time and icons indicating the

current playback status.

NOTES:

To skip to the next track, press the Right button; to skip to the beginning of the Ř

current track, press the Left button once; to skip to the beginning of the previous

track, press the Left button twice (or the Left button once if the track’s elapsed time

is less than 5 seconds.)

You can use the Transport Control buttons to control playback (skipping to the Ř

previous or next track, searching at high speed forward or backward within a track,

playing a ﬁle, pausing playback or stopping playback).

To repeat a ﬁle or folder, press the Option/Info Button and select the Repeat option. Ř

Each press of the Left or Right buttons will change the setting from Off (no repeat)

to On (ﬁles at the current directory level of the drive). Repeat will always be activated

when Shufﬂe Music playback is turned on.

To play the audio tracks in random order, press the Options/Info button and select Ř

Shufﬂe. Each press of the Shufﬂe turns the setting on or off. The AVR will automatically

repeat the tracks until playback is stopped manually.

To collapse a folder or return to the previous menu level, press the Back/Exit Ř

button.

Operating Your AVR

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR 1510 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR 1510

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info