Bedienungsanleitung Harman Kardon AVR160 (Seite 12 von 48) (Englisch)

502590

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

REMOTE CONTROL FUNCTIONS

HDMI 2 and 3

: Each code set controls a source device (VCR/PVR, DVD

player or cable/satellite set-top box) connected to one of these inputs.

AUX

: Controls a device connected to the Auxiliary Input.

Any given button may have different functions, depending on which

component is being controlled. Some buttons are labeled with these

functions. For example, the Sleep Button is labeled for use as the Channel

Up Button when controlling a television or cable box. See Table A10 in the

appendix for listings of the different functions for each type of component.

IR Transmitter Lens

: As buttons are pressed on the remote, infrared

codes are emitted through this lens.

Power On Button

: Press this button to turn on the AVR or another device.

The Main Power Switch must first have been switched on.

Mute Button

: Press to mute the AVR 160’s speaker and headphone

outputs. To end the muting, press this button, adjust the volume, or turn off

the receiver.

Program Indicator

: This LED lights up or flashes in one of three colors as

the remote is programmed with codes.

Power Off Button

: Press to turn off the AVR 160 or another device.

AVR Selector

: Press to switch the remote to AVR device mode.

Source Selectors

: Press one of these buttons to select a source device,

e.g., DVD, CD, cable TV, satellite or HDTV tuner. This will also turn on the

receiver and switch the remote’s device mode to operate the source.

AM/FM Button

: Press this button to select the tuner as the source, or to

switch between the AM and FM bands.

6-/8-Channel Input Selector

: Press this button to select the

6-/8-Channel Inputs as the audio source. If a signal is present at the

component video inputs assigned to this source, it will be used. If not, the

receiver will use the video input and remote control codes for the last-

selected analog video source.

Test Tone

: Press this button to activate the test tone for manual output-

level calibration.

TV/Video

: This button has no effect on the receiver, but is used to switch

video inputs on some video source components.

Sleep Button

: Press this button to activate the sleep timer, which turns off

the receiver after a programmed period of time of up to 90 minutes.

Channel Controls

: These buttons have no effect on the receiver, but are

used to change channels on TVs and some video sources.

Volume Control

: Press to raise or lower the volume, which will be shown

in decibels (dB) in the Message Display.

On-Screen Display (OSD)

: Press this button to activate the on-screen

menu system.

Channel Level

: Press this button to adjust the output levels for any

channel so that all speakers sound equally loud at the listening position.

Speaker Setup

: Press this button to configure speaker sizes, that is, the

low-frequency capability of each speaker.

Navigation (

KLM N

) and OK Buttons

: These buttons are used to

make selections within the on-screen menu system, or when accessing the

functions of the four buttons surrounding this area of the remote – Channel

Level, Speaker Setup, Digital Input or Delay.

Digital Input Select

: Press this button to select the specific digital audio

input (or analog audio input) to which the current source is connected.

Delay

: Press this button to set delay times that compensate for placing the

speakers at different distances from the listening position, or to resolve a “lip

sync” issue that may be caused by digital video processing.

NOTE

: The Channel Level, Speaker Setup, Digital Input Select and Delay

functions may also be adjusted using the OSD on-screen menus. In

addition, the EzSet/EQ system may be used to adjust the Channel Level,

Speaker Setup and Delay settings automatically.

Numeric Keys

: Use these buttons to enter radio station frequencies or

to select station presets. Press the Direct Button before entering the station

frequency.

Tuning Mode

: This button toggles between manual (one frequency step

at a time) and automatic (seeks frequencies with acceptable signal strength)

tuning mode. It also toggles between stereo and mono modes when an FM

station is tuned.

Memory

: After you have tuned a particular radio station, press this button,

then the Numeric Keys, to save that station as a radio preset.

Tuning

: Press these buttons to tune a radio station. Depending on whether

the tuning mode has been set to manual or automatic, each press will

either change one frequency step at a time, or seek the next frequency with

acceptable signal strength.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR160 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR160

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info