Bedienungsanleitung Harman Kardon AVR247 (Seite 13 von 76) (Englisch)

502596

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

REMOTE CONTROL FUNCTIONS

The AVR 247 remote is capable of controlling 11devices, including the

AVR itself and an iPod docked in the optional The Bridge accessory.

During the installation process, you may program the codes for each

of your source components into the remote. Each time you wish to use

the codes for any component, first press the Selector button for that

component. This changes the button functions to the appropriate codes

for that product.

NOTE: Several of the Input Selectors are shared between two

devices. The selector button will light in red when the remote

is in the device mode printed on the button, and it will light in

green for the device mode printed above the button. To switch

between the two device modes, press the selector

twice

quickly

in succession. The selector will remain in the last-selected mode

until the next time you press the selector twice quickly.

For example, the first time you press the DVD button, the button

will light up in red, indicating that the remote is in DVD mode. If

you press another selector, such as the VID3 selector, and then

press the DVD button again, the DVD button will remain red,

indicating the remote is still in DVD mode. Now press the DVD

button twice quickly. At the first press the button will light red,

indicating that the remote is in DVD mode. On the second press

the button will turn green, indicating that the remote is now in CD

mode. If you press a different selector and return to the DVD/CD

Selector, you will observe that the remote is still in CD mode.

Each Input Selector has been preprogrammed to control certain types

of components, with only the codes specific to each brand and model

changing, depending on which product code is programmed. The

device types programmed into each selector may not be changed.

However, you may program the HDMI 1 and 2 Selectors with the DVD,

cable/satellite or VCR/PVR device type.

DVD: Controls DVD players and recorders.

CD: Controls CD players and recorders.

Tape: Controls cassette decks.

Video 1: Controls VCRs, TiVo

and PVRs.

Video 2: Controls cable and satellite television set-top boxes.

Video 3: Controls televisions and other video displays.

Video 4: Controls televisions and other video displays.

HDMI 1 and 2: Each code set controls a source device (VCR/PVR,

DVD player or cable/satellite set-top box) connected to one of these

two inputs.

XM: Controls the AVR functions for XM Satellite Radio.

The Bridge/DMP: Controls an iPod docked in The Bridge.

For example, if you have inserted a disc in your CD player and you

would like to skip ahead three tracks, but you then find that the volume

is too loud, you would follow this procedure:

1. Press the CD Input Selector to switch to the codes that control your

CD player. If the remote is in DVD mode, press the selector twice quickly

to switch to CD mode, indicated by the selector lighting in green.

2. Press the Play Button (in the Transport Controls section) if the disc

is not already playing.

3. Press the Skip Up Button three times to advance three tracks.

4. Press the AVR Button so that you can access the Volume Controls.

5. Press the Volume Down Button until the volume level is satisfactory.

Any given button may have different functions, depending on which

component is being controlled. Some buttons are labeled with these

functions. For example, the Sleep and DSP Surround Buttons are

labeled for use as Channel Up/Down Buttons when controlling a televi-

sion or cable box. See Table A8 in the appendix for listings of the

different functions for each type of component.

IR Transmitter Lens: As buttons are pressed on the remote,

infrared codes are emitted through this lens. Make sure it is pointing

toward the component being operated.

Power On Button: Press this button to turn on the AVR or another

device. The Master Power Switch on the AVR 247’s front panel must

first have been switched on.

Mute Button: Press this button to mute the AVR 247’s speaker and

headphone outputs temporarily. To end the muting, press this button

or adjust the volume. Muting is also canceled when the receiver is

turned off.

Program Indicator: This LED lights up or flashes in one of three colors

as the remote is programmed with codes.

Power Off Button: Press this button to turn off the AVR 247 or

another device.

AVR Selector: Press this button to switch the remote to the codes

that operate the receiver.

Input Selectors: Press one of these buttons to select a source

device, which is a component where a playback signal originates, e.g.,

DVD, CD, cable TV, satellite or HDTV tuner, or an iPod docked in the

optional The Bridge. This will also turn on the receiver and switch the

remote’s mode to operate the source device.

XM Radio Button: Press this button to select XM Satellite Radio as

the source. You will need to have purchased and activated an XM antenna

module, and you will also need to subscribe to the XM Radio service.

Visit www.xmradio.com for more information.

AM/FM Button: Press this button to select the tuner as the source,

or to switch between the AM and FM bands, or XM Radio.

6-/8-Channel Input Selector: Press this button to select the

6-/8-Channel Inputs as the audio source. The receiver will use the video

input and remote control codes for the last-selected video source.

Test Tone: Press this button to activate the test tone for manual

output-level calibration.

TV/Video: This button has no effect on the receiver, but is used to

switch video inputs on some video source components.

AVR247om.qxd 7/10/07 1:05 PM Page 13

Harman Kardon AVR247 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info