Bedienungsanleitung Harman Kardon AVR254 (Seite 33 von 76) (Englisch)

502597

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

INITIAL SETUP

Before you begin enjoying your new receiver, a few adjustments should

be made to configure the AVR 254 to match your actual system.

Make sure that you have connected a video display to one of the

video

monitor outputs on the receiver. When you turn on your display and the

AVR, if the display is connected to the AVR via an analog video (com-

posite, S-video or component) connection, you may see a plain black

screen. Press the front-panel Resolution Button, and the current video

output resolution will appear in the Message Display. Use the

⁄

Button

to change it to 480i, which should be compatible with all video displays,

then press the OK Button to select the new setting. You will be prompted

to accept or cancel the change; the CANCEL message will appear on

the front panel. Press the

Button to view the ACCEPT option, and

then press the OK Button to complete the change to the output resolution.

The Main Menu should appear when you press the AVR Settings Button

on the remote, or the AVR Button on the front panel. See Figure 43.

Figure 43 – Main Menu

Although it’s possible to configure the AVR using only the remote and

the front-panel messages, we recommend that you use the full-screen

menu system.

NOTE: When using the AVR’s on-screen menu system, we rec-

ommend selecting a video output resolution of 720p or higher for

best legibility, and to provide graphics that simplify some configu-

ration options. Depending on the resolution selected, the menus

shown by your system may vary in appearance.

Using the On-Screen Menu System

The menu system is accessed by pressing the AVR Settings Button

on the remote. See Figure 44.

Figure 44 – Settings Buttons

The Main Menu will appear (see Figure 43), and if a video source is

playing, it will be visible behind the transparent menu.

The menu system consists of five main menus: Source Selection,

Setup Source, Speaker Setup, Zone 2 and System.

Use the

⁄

‹

›

Buttons on the remote or front panel to navigate

the menu system, and press the OK Button to select a menu or setting

line or to enter a new setting.

The current menu, setting line or setting will appear in the Message

Display as well as on screen.

To return to the previous menu or exit the menu system, press the

Back/Exit Button. Be certain all settings are correct, as any changes you

have made will be retained.

We recommend that most users follow the instructions in this INITIAL

SETUP section to configure a basic home theater system. You may

return to these menus at any time to make additional adjustments.

Thanks to the EzSet/EQ system, most of the menu adjustments may

be saved until you have become more familiar with the AVR, and are

therefore described in the Advanced Functions section.

The Initial Setup section requires that you complete all of the steps

in the Installation section that apply to your receiver. You should have

connected all of your loudspeakers and a video display, as well as your

source devices. You should be able to turn on the receiver and view

the main menu on

your video display when you press the AVR Settings

Button. If necessary, reread the Installation Section and the beginning of

this section before continuing.

Configure the AVR 254 Using EzSet/EQ Technology

One of the most important and perhaps often overlooked aspects of

setting up a home theater system is to calibrate the receiver to match

the loudspeakers, which enables the AVR to perform at its best.

Until recently, most receivers required the user to perform the calibration

and configuration manually, a somewhat tedious process that called for

a good ear or the purchase of an SPL (sound-pressure level) meter.

Although you may configure the AVR 254 manually, as described in

the Advanced Features section, we recommend that you take advantage

of our signature the EzSet/EQ system.

Before beginning, eliminate extraneous background noise that might

affect the results, such as noisy air conditioning. Try to avoid making

any loud noises while running EzSet/EQ setup.

IMPORTANT SAFETY NOTE: During the EzSet/EQ procedure,

a series of very loud test tones will be played through all of the

speakers. Avoid sitting or standing close to any one speaker

during the procedure. If you are particularly sensitive to loud

noises, you may wish to leave the room and have someone

else run the EzSet/EQ process.

Step One – Place the included EzSet/EQ microphone in the listening

position, or in the center of the room, at about the same height as the

listeners’ ears. The microphone features a threaded insert on the bottom

so that it can be mounted on a camera tripod for stability.

Step Two – Plug the EzSet/EQ microphone into the Headphone

Jack/EzSet/EQ Microphone Input Jack on the front of the receiver.

See Figure 45.

AVR254om.qxd 3/28/08 12:46 PM Page 33

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR254 Seite 33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info