Bedienungsanleitung Harman Kardon AVR254 (Seite 44 von 76) (Englisch)

502597

Zoom out

Zoom in

Vorherige Seite

1/76

Nächste Seite

ADVANCED FUNCTIONS

When in doubt, check the jacket of your DVD for more information on

which surround modes are available on the disc. Usually, nonessential

sections of the disc, such as trailers, extra materials or the disc menu,

are only available in Dolby Digital 2.0 (2-channel) or PCM 2-channel

mode. If the main title is playing and the letters in the Speaker/Channel

Input Indicators are not lit for all speaker locations, look for an audio or

language setup section in the disc’s menu. Also, make sure your DVD

player’s audio output is set to the original bitstream rather than just

PCM. Check the DVD player’s output setting by stopping play of the

disc and checking the DVD player’s menu system.

As indicated in Table A12, different surround modes may only be

available with certain input signals or bitstream formats. For any incom-

ing signal, only a limited number of surround modes are available.

Although there is never a time when all of the AVR 254’s surround

modes are available, there is usually a wide variety of modes available

for a given input.

To select a surround mode, press the Surround Modes Button

(front panel or remote) repeatedly until the desired option appears:

SURR: AUTO SELECT, SURR: VIRTUAL, SURR: STEREO, SURR: MOVIE,

SURR: MUSIC or SURR: GAME. The option will be displayed in the

Lower Line of the Message Display, and the Surround Modes menu

will appear on screen (see Figure 57). Press the OK Button, and the

menu option will move to the Upper Line, while the Lower Line indicates

the current mode. Use the

⁄

Buttons to select a new mode and

press the OK Button, then press the Back/Exit Button to return to the

previous menu.

Dolby Surround Settings

Some additional settings are available for Dolby modes. Three settings

are active only when the Dolby Pro Logic II or IIx Music modes have

been selected. See Figure 59.

Figure 59 – Dolby Pro Logic II/IIx Music Mode Settings

Center Width: This setting affects how vocals sound through the three

front speakers. A higher number (up to 7) focuses the vocal information

tightly on the center channel. Lower numbers broaden the vocal sound-

stage across the three speakers. Use the

‹

›

Buttons to change the

setting.

Dimension: This setting affects the depth of the surround presentation,

allowing you to “move” the sound toward the front or rear of the room.

The setting of “0” is a neutral default. Setting “F-3” moves the sound

mostly toward the front of the room, while setting “R-3” moves the sound

mostly toward the rear. Use the

‹

›

Buttons to change the setting.

Panorama: With the Panorama mode turned ON, some of the sound

from the front speakers is moved to the surround speakers, creating an

enveloping “wraparound” type of effect. Each press of the OK Button

toggles the setting on or off.

Night Mode

Night mode is available with some Dolby Digital programs, if it has been

encoded in the material. It compresses the peak sound levels, maintain-

ing the intelligibility of the dialogue and quieter passages, while reducing

the loudness of special effects and louder passages to avoid disturbing

others. Night Mode is accessed from the Audio Effects menu. Press

the Audio Effects Button and scroll down to the Night Mode line. Three

levels of compression are available:

Off: At this setting, there is no compression, as the Night mode is

deactivated.

Half: A mild compression is applied.

Full: More compression is applied.

Table A12 provides descriptions of all surround modes available on the

AVR 254, along with the incoming bitstreams or signals that the particular

mode may be used with. Feel free to experiment and simply cycle

through all of the available modes at any time; you cannot cause any

problems for the AVR 254 by doing so.

NOTE: To access 6.1- and 7.1-channel modes, such as

Dolby Digital EX, DTS-ES, Logic 7 (7.1 modes), DTS Neo:6

(6.1 modes), and 7-channel Stereo, you must enable the

surround back channels as explained in the Manual Setup

section. You should not enable these channels if you don’t

have surround back speakers in your system.

AVR254om.qxd 3/28/08 12:46 PM Page 44

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR254 Seite 44

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info