Bedienungsanleitung Harman Kardon AVR260 (Seite 23 von 54) (Englisch)

502598

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

ENGLISH

SYSTEM CONFIgURATION

If you previously saved EzSet/EQ results in this setup position and you wish to

reconfigure the speakers from scratch, select the Reset option.

For best results, we recommend configuring the speakers in this order,

although it may differ from the order in which the submenus appear in the

Manual Speaker Setup menu: Number of Speakers, Crossover(Size), Sub

Mode, Distance and Level Adjust.

Number of Speakers

Move the cursor to the Number of Speakers line and press the Set Button. See

Figure 10.

Figure 10 – Number of Speakers Menu

The Number of Speakers menu lists each of the speaker groups.

Program the correct setting for each group: ON when the speakers are present

in the system, and OFF for positions where no speakers havebeen installed.

The Front Left & Right speakers are always ON and may not be disabled.

Any changes made to the system configuration will be reflected in the total

number speakers displayed at the top of the screen.

The setting for the surround back speakers includes a third option: Zone 2. The

AVR 260 is among the few receivers in its class that is capable of multizone

operation, allowing placement of a pair of speakers in another room with

listeners in the remote room enjoying either the same program as in the

main room or a different source. The AVR’s assignable surround back amplifier

channels make multizone operation easier than ever, since an external power

amplifier is no longer required. Simply select the Zone 2 option at this line,

and connect the Surround Back Speaker Outputs to loudspeakers located in

the remote room. The main room will be configured automatically for up to

5.1channels. See the Multizone Operation section for more information.

The settings in this menu affect a number of aspects of the AVR’s operation,

including the remainder of the speaker setup process and the availability of

various surround modes at any time.

When you have finished programming the number of speakers in the system,

select the Back option to insure the settings are saved correctly.

You may use the Back/Exit Button, and the settings will be saved.

Adjust Crossover Frequencies Menu

After you have programmed the number of speakers in the system, the

AVR will return to the Manual Speaker Setup menu. Navigate to the

Crossover (Size) line and press the OK Button to display the Adjust Crossover

Frequencies menu (see Figure 11).

Figure 11 – Adjust Crossover

Frequencies Menu

The AVR will only display those speaker groups which you programmed in the

Number of Speakers menu.

Refer back to Step One, where you determined each speaker’s crossover.

Again, for the main speakers, this is the lowest frequency the speaker

reproduces well; and for the subwoofer, it’s the highest.

For each main speaker, select one of the seven crossover frequencies: 40Hz,

60Hz, 80Hz, 100Hz, 120Hz, 150Hz or 200Hz. If the crossover frequency

you determined in Step One is below 40Hz, select the first option, “Large”.

This setting doesn’t refer to the speaker’s physical size, but to its frequency

response, which is also called “full range”. This means the speaker is capable

of playing sounds throughout the frequencyspectrum, from the high pitches

to the bass.

Specify the size of the subwoofer’s transducer as 8, 10, 12 or 15 inches.

Make a note of each speaker group’s crossover setting in Table A3 in the

appendix.

When you have finished entering the settings, remember to select

Back

, not

to press the Exit Button.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR260 Seite 23

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR260

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info