Bedienungsanleitung Harman Kardon AVR260 (Seite 32 von 54) (Englisch)

502598

Zoom out

Zoom in

Vorherige Seite

1/54

Nächste Seite

OPERATION

When one of the Dolby Pro Logic II Music modes is selected, access to the

Edit submenu becomes available. This submenu may be used to adjust

special settings available only in Music mode: Center Width, Dimension and

Panorama.

Once you have programmed the default surround mode for each type of

program, simply select the line from the Surround Modes menu any time you

wish to override the AVR’s automatic surround mode selection. The AVR will

use the same surround mode the next time the source input is selected.

NOTE

: Dolby Digital 2.0 signals may also include a Dolby Surround flag

indicating DS-ON or DS-OFF, depending on whether the 2-channel bitstream

contains only stereo information, or a downmix of a multichannel program

that can be decoded by the Dolby Pro Logic decoder in the AVR. By default,

these signals are played in Dolby Pro Logic IIx Movie mode, but you may

select another Dolby surround mode manually.

Surround Modes

Surround mode selection is dependent upon the format of the incoming

audio signal, as well as personal taste. There is no harm in experimenting

with all of the modes available with any given source material. Information

about the Dolby and DTS modes is available on the companies’ Web sites:

www.dolby.com and www.dtsonline.com.

When in doubt, check the jacket of your DVD for more information on which

surround modes are available on the disc. Usually, nonessential sections of

the disc, such as trailers, extra materials or the disc menu, are only available

in Dolby Digital 2.0 (2-channel) or PCM 2-channel mode. If the main title is

playing and the letters in the Speaker/Channel Input Indicators are not lit for

all speaker locations, look for an audio or language setup section in the disc’s

menu. Also, make sure your DVD player’s audio output is set to the original

bitstream rather than just PCM. Check the DVD player’s output setting by

stopping play of the disc and checking the DVD player’s menu system.

Different surround modes may only be available with certain input signals

or bitstream formats. For any incoming signal, only a limited number of

surround modes are available. Although there is never a time when all of the

AVR 260’s surround modes are available, there is usually a wide variety of

modes available for a given input.

To select a surround mode, press the Surround Modes Button

, select

either Auto Select - AVR Selects Best Mode, or move the blue line to the other

options: Virtual Surround, Stereo, Movie, Music and Video Game. Each of these

5 options permit several selections, accessed by pressing the OK Button (See

Figure 14).

Dolby Surround Settings

Some additional settings are available for Dolby modes. Three settings

are active only when the Dolby Pro Logic II or IIx Music modes have been

selected. See Figure 15.

Figure 15 – Dolby Pro Logic II/IIx Music

Mode Settings

Center Width

: This setting affects how vocals sound through the three

front speakers. A higher number (up to 7) focuses the vocal information

tightly on the center channel. Lower numbers broaden the vocal soundstage

across the three speakers. Use the

M N

Buttons to change the setting.

Dimension

: This setting affects the depth of the surround presentation,

allowing you to “move” the sound toward the front or rear of the room. The

setting of “0” is a neutral default. Setting “F-3” moves the sound mostly

toward the front of the room, while setting “R-3” moves the sound mostly

toward the rear. Use the

M N

Buttons to change the setting.

Panorama

: With the Panorama mode turned ON, some of the sound from

the front speakers is moved to the surround speakers, creating an enveloping

“wraparound” type of effect. Each press of the OK Button toggles the setting

on or off.

Night Mode

Night mode is available with some Dolby Digital programs, if it has been

encoded in the material. It compresses the peak sound levels, maintaining

the intelligibility of the dialogue and quieter passages, while reducing the

loudness of special effects and louder passages to avoid disturbing others.

Night Mode is accessed from the Audio Effects menu. Press the Audio Effects

Button and scroll down to the Night Mode line. Three levels of compression

are available:

Off

: At this setting, there is no compression, as the Night mode is

deactivated.

Half

: A mild compression is applied.

Full

: More compression is applied.

Feel free to experiment and simply cycle through all of the available surround

modes at any time; you cannot cause any problems for the AVR 260 by doing

so.

Note

: To access 6.1- and 7.1-channel modes, such as Dolby Digital EX, DTS-

ES, Logic 7 (7.1 modes), DTS Neo:6 (6.1 modes), and 7-channel Stereo, you

must enable the surround back channels as explained in the Manual Setup

section. You should not enable these channels if you don’t have surround back

speakers in your system.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Harman Kardon AVR260 Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR260

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info