Bedienungsanleitung Harman Kardon AVR355 (Seite 34 von 58) (Englisch)

502548

Zoom out

Zoom in

Vorherige Seite

1/58

Nächste Seite

34 OPERATION

Operation

Night Mode

Night mode is available with some Dolby Digital

rograms, if it has been encoded in the material.

It compresses the peak sound levels, maintaining

the intelligibility of the dialogue and quieter

passages, while reducing the loudness of special

effects and louder passages to avoid disturbing

others. Night Mode is accessed from the Audio

Effects menu. Press the Audio Effects Button and

scroll down to the Night Mode line. Three levels

of compression are available:

Off: At this setting, there is no compression, as

the Night mode is deactivated.

Half: A mild compression is applied.

Full: More compression is applied.

Feel free to experiment and simply cycle through

all of the available surround modes at any time;

you cannot cause any problems for the AVR 355/

AVR 255 by doing so.

NOTE: To access 6.1- and 7.1-channel modes,

such as Dolby Digital EX, DTS-ES, Logic 7 (7.1

modes), DTS Neo:6 (6.1 modes), and 7-channel

Stereo, you must enable the surround back

channels as explained in the Manual Setup

section. You should not enable these channels if

you don’t have surround back speakers in your

system.

Tape Recording

In normal operation, the audio or video source

selected for listening through the AVR is sent to

the record outputs. This means that any program

you are watching or listening to may be record-

ed simply by placing machines connected to the

outputs for Analog Outputs

or Video 1

Outputs

in the record mode.

When a digital audio recorder is connected to

the Coaxial Digital Output

, you are able

to record the digital signal using a CD-R,

MiniDisc or other digital recording system.

NOTES:

• The digital outputs are active only when a digi-

tal signal is present, and they do not convert an

analog input to a digital signal, or change the for-

mat of the digital signal (e.g. Dolby Digital to

PCM or vice versa). In additon, the digital recorder

must be compatible with the output signal. For

example, the PCM digital output from a CD player

may be recorded on a CD-R or MiniDisc, but

Dolby Digital or DTS signals may not.

• To make an analog recording from a digital

source is possible, but only from a PCM source

(not Dolby Digital or DTS) and correctly only with

"Surround Off" mode (with any Surround mode

only the L/R front signals will be fed to the

record outputs).

Using (AVR 355 only)

When Harman Kardon’s (optional) is

onnected and a compatible Apple® iPod® is

docked in The Bridge, press the DMP

Selector Button C on the Remote Control or

the Source List @ followed by the Up/Down

Arrows to choose the iPod as the input source

allowing playback of audio, video and still-image

materials on your iPod through your high-quality

audio/video system. Pressing the DMP

Selector Button C will also activate the AVR

emote’s control codes for the iPod, and you may

also use the front-panel controls to operate the

iPod.

When The Bridge is properly connected and a

compatible iPod is properly docked, the Upper

Display Line

will read DMP/

CONNECTED

. Once that message appears,

use the remote or front-panel buttons to control

the iPod. See the Function List Table on page 46

for a listing of the remote control buttons that

have been programmed to control the iPod.

Figure 16 - On Screen Display, iPod playing

Figure 17 - On Screen Display, iPod Menu

Selection

Complete details on operating an iPod using

and an AVR remote are furnished

with .

While a selection is playing, the song title, artist

and album name, if available on the iPod, will

scroll across the upper line in the front panel

Message Display

. The lower line will

display the elapsed time of the track on the left,

the play mode icon, and the time remaining on

the right.

In addition, if a video display is connected to the

AVR, a screen will appear briefly to display infor-

mation about the iPod’s status and the track. The

top line will display the play mode icon, with the

phrase “Now Playing” appearing to the right to

remind you that you are viewing the status of

the current track, as opposed to another menu

creen. Below that the AVR displays the total

number of tracks in the current play list on the

right (all materials on the iPod are considered

one of the play lists) with the number of the

current track on the left. The song title, artist and

album are displayed. At the bottom of the screen

is a graphic bar indicating the current play

position within the track, with the elapsed and

remaining times appearing below the bar.

After a period of time the screen may disappear

from view. The length of time is set using the

Full-OSD Time Out setting in the System Settings

menu (described in the Advanced Functions sec-

tion). You may restore the Now Playing screen to

view by pressing either of the

‹

›

Buttons

and you may then navigate the menus as

explained above.

NOTE: It is strongly recommended that you use

a screen saver built into your video display to

avoid possible damage from “burn-in” that may

occur with plasma and many CRT displays when

a still image, such as a menu screen, remains on

display for an extended period of time.

Memory Backup

This product is equipped with a memory backup

system that preserves tuner presets and system

configuration information if the unit is turned off

completely, accidentally unplugged or subjected

to a power outage. This memory will last for

approximately two weeks, after which time all

information must be reentered.

Harman Kardon AVR355 Seite 34

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Harman Kardon AVR355

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info